Help Support Kitchen Knife Forums by donating using the link above or becoming a Supporting Member.
Results 1 to 4 of 4

Thread: cutting/buffing compound

  1. #1

    Join Date
    Jan 2012

    cutting/buffing compound

    Anyone know what compounds you can use on a carbon steel knife that will actually cut and polish it?

    green rouge with chromium oxide seems to be the usual? But its always .5 micron or smaller it seems. To fine a grit if your only at about 1000 wetsand?

  2. #2
    Senior Member Adagimp's Avatar
    Join Date
    May 2011
    Tempe, AZ
    I'm not sure what your intention is with what you are looking for. Do you want a compound that you can polish the body of the knife and sharpen the edge with, because that may be a tall order. There are a whole slew of compounds out there now for refining an edge after sharpening, and the same compounds can be used to polish up a bevel or body of a knife, but to sharpen an edge with just the compound seems like it would take forever. If you wanna polish up the bevel or body a micromesh kit of sandpaper will probably do the trick for you.

  3. #3
    Senior Member
    Join Date
    Feb 2011
    Black emery, then Green stainless, then White in that order will bring mirror to carbon.

  4. #4

    Join Date
    May 2011
    Jackson, MI.
    I might suggest taking it to 2500 grit with sandpaper first, that will make your polishing job a ton easier and faster

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts