Quantcast
Updates from Metal land.
+ Reply to Thread
Page 1 of 23 12311 ... LastLast
Results 1 to 10 of 223

Thread: Updates from Metal land.

  1. #1
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522

    Updates from Metal land.

    Well not much is new knife wise.....but I have finished my tax return and the railings and water feature which have been keeping me from pressing on. So...

    Next week I am on Damascus for my orders.

    x2 Feather pattern billets for 2 Gyuto's and one Suji
    x1 Twisted W's billet for ferrules and endcaps.
    x1 Turbulence billet for a big Suji
    x2 100 layer forged ladder billet for 2 san mai/blue paper Gyuto's and a carving knife and fork set.

    That should keep me warm for the best part of next week.
    Need to do some more stainless billets too but unfortunately my landlord trod on the ceramic shroud for my thermocouple so I need to replace that first.
    Other than that, all is well in metal land and looking forward to a toasty warm week forging

  2. #2
    Senior Member

    Join Date
    Feb 2011
    Location
    San Diego, CA
    Posts
    4,221
    Quote Originally Posted by WillC View Post
    ...unfortunately my landlord trod on the ceramic shroud for my thermocouple so I need to replace that first....
    Now, how on Earth does that happen?

  3. #3
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522
    They put their meters in some daft places so he has to climb up on a workbench to read the water meter. "Whoops, don't know what that was but it went crunch" says he.
    Fortunately I can just get a new ceramic shroud for it rather than a whole new thing. Ah well.

  4. #4
    Senior Member Aphex's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    161
    I'm quite frankly glad i no longer have to do any tax returns. I found them completely unfathomable at times.

    I didn't realise you were that busy knife wise. I bet you must be pleased you decided to get involved in making kitchen knives, everyting seems to be working out pretty well for you.

  5. #5
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522
    I don't find the tax return too bad, just takes a while when you leave it all to the end of the year like me. Every year I swear I'll do it every month from now on.
    Yes it will be a busy month. I'm very happy to be making Kitchen knives indeed, its fantastic to do something which can adapt and evolve, it has brought me a great new love and enthusiasm for my work, as well as helping to keep my workshop going. While I have s few architectural bit and pieces to do, its pretty tough out there right now, many who make architectural/artistic ironwork are wondering how they will pay the rent at the moment. I feel lucky in many ways to have found a new way to use my skills, and a great place like this to learn and set me on the right track.

  6. #6
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522
    Well damascus week is in full force, the split feather billets are pickling clean over night ready for the last weld, and moment of truth to see if it all looks hunky dory in the morning.
    Damascus for the clad knives is done and ferrules and Turbulence Suji have a couple of welds more to do. Should see some blanks shaping up over the weekend.
    Think i'll go for a bold feather pattern for the ferrules this time as well. I have some of the other billet left for the end caps.

  7. #7
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522
    Some profiles for approval here, before the blanks start coming together, exciting......
    http://www.kitchenknifeforums.com/sh...-options/page3

  8. #8
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522
    Ok, mostly focused on the Feathered W's billets today as the last weld and final forging is so critical and can end in tears with this pattern. After splitting the two billets I pickled clean and re-welded. This time I kept the billets in a large square block by forging on all sides turning with some big tongs in the hydraulic press. I cut each block down the middle, this gives the right compression to the pattern when forged out. So i ended up with 4 generous bar of soap size billets of precious feather pattern. plenty of material to work with.

    Got a couple of the billets forged out and roughly profiled. All done very hot with this pattern, leaving everything well oversize. Then I heat cycle a few times to reduce the grain size after all that welding.
    I had to get one at least partially ground so I could check the pattern. This time I had an 11 layer start to the pattern rather than 15. This makes the pattern a tad bolder with the W's more visible.
    This is the beginnings of Davids little Suji.







    Sean is going for a 240mm Masamoto profile on his Gyuto. I think this will be quite something in this pattern. The billets are so generous in size I may make a 270mm masamoto profile with the last extra one. Unless anyone has any better ideas what to do with it?

  9. #9

    HHH Knives's Avatar
    Join Date
    Apr 2011
    Location
    Michigan
    Posts
    3,629
    Will, These look awesome! I never get tired of feather pattern.. PM inbound I have a forging question..

    Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth, Guided by the spirit.. Randy Haas

    240mm Stainless Gyuto!!

  10. #10
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,522
    Thanks Randy, I got pretty tired making it....But its all worth it

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts