Burl Source
Weird Wood Pusher
- Joined
- Jun 13, 2011
- Messages
- 4,340
- Reaction score
- 7
Where I work we took an old mobile home and gutted it.
That was where I used to have my office like area and where I would store wood I wanted to keep protected from the elements and out of the public eye. Including my coworkers. They are likely to take a $1000 piece of wood and use it to make a $500 table. As I would buy wood from estates or wherever I could find unusual stuff I would store it inside the trailer. Now I can't get more than about 5 feet inside the trailer. Stuff piles up after several years go by.
This was from a plank that was at the edge of the jumble.
It is some Striped Ebony that was milled in 1983. It felt like I was lifting a big slab of iron.
I will cut these into blocks and send them to K&G. This type of ebony takes the stabilizing very well and is easier to work and finish afterwards.
You are seeing it with over 30 years of dust in this photo. But it cleans up with orange and black stripes.
I was thinking it might be good for some WA handles.
The fellow I bought this from was the one who originally milled it.
He got a little mad when I called it Macassar Ebony. I got a heated education about Asian Ebonies after my ignorant comment.
He told me their local name for this type of Ebony which I promptly forgot. It is from Indonesia, so I call it Striped Indonesian Ebony. Or....we could call it Halloween Ebony since it is orange and black, or.....Harley Ebony. Unless you can come up with a better name.
That was where I used to have my office like area and where I would store wood I wanted to keep protected from the elements and out of the public eye. Including my coworkers. They are likely to take a $1000 piece of wood and use it to make a $500 table. As I would buy wood from estates or wherever I could find unusual stuff I would store it inside the trailer. Now I can't get more than about 5 feet inside the trailer. Stuff piles up after several years go by.
This was from a plank that was at the edge of the jumble.
It is some Striped Ebony that was milled in 1983. It felt like I was lifting a big slab of iron.
I will cut these into blocks and send them to K&G. This type of ebony takes the stabilizing very well and is easier to work and finish afterwards.
![se001.jpg](https://proxy.imagearchive.com/a8e/a8e1d50af4901a9a385bdb8ee670fed2.jpg)
You are seeing it with over 30 years of dust in this photo. But it cleans up with orange and black stripes.
I was thinking it might be good for some WA handles.
The fellow I bought this from was the one who originally milled it.
He got a little mad when I called it Macassar Ebony. I got a heated education about Asian Ebonies after my ignorant comment.
He told me their local name for this type of Ebony which I promptly forgot. It is from Indonesia, so I call it Striped Indonesian Ebony. Or....we could call it Halloween Ebony since it is orange and black, or.....Harley Ebony. Unless you can come up with a better name.