Quantcast
cast dendritic cobalt?
+ Reply to Thread
Results 1 to 5 of 5

Thread: cast dendritic cobalt?

  1. #1
    Senior Member
    Chef Niloc's Avatar
    Join Date
    Feb 2011
    Location
    Long island NY
    Posts
    1,088

    cast dendritic cobalt?

    Any of you have experience with it?

    What can you guys tell me about it, and compare it to steels I might be more familiar with.

  2. #2
    Senior Member
    Join Date
    Mar 2011
    Posts
    217
    I assume you're referring to the Boye knives. It's a cobalt alloy rather than a steel. These cobalt alloys have large carbides and good wear resistance but much lower hardness than knife steels. It's greatest attribute is corrosion resistance. He calls it dendritic because it's cast to shape making the carbides even larger and more segregated.

  3. #3
    Senior Member
    Chef Niloc's Avatar
    Join Date
    Feb 2011
    Location
    Long island NY
    Posts
    1,088
    Could you compare it to 52100 or AEB?

  4. #4
    Senior Member spaceconvoy's Avatar
    Join Date
    Mar 2011
    Posts
    166
    So he's purposely trying to make the carbides larger to get built-in micro-serrations? Interesting... sounds ideal for cutting rope in a salt water environment, but maybe not much else.

  5. #5
    Senior Member
    Join Date
    Mar 2011
    Posts
    217
    The casting to shape is more likely a manufacturing decision rather than a performance one.

    It's completely different than 52100 or AEB-L. 52100 or AEB-L are fine carbide steels for razors and thin knives. The cobalt alloy is much lower hardness and higher wear resistance, it should only be used in thicker knives for slicing abrasive materials. It's primary use is for applications requiring very high corrosion resistance.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts