Quantcast
Steel straightness
+ Reply to Thread
Results 1 to 10 of 10

Thread: Steel straightness

  1. #1

    RRLOVER's Avatar
    Join Date
    Mar 2011
    Location
    FIB
    Posts
    1,127

    Steel straightness

    This is a newbie question.I ordered some cpm154 and it came pretty bent up.Does being a PM steel have any effect on trying to straighten the steel out,if I even what to try......I just hate to return stuff,such a PITA!

  2. #2

    Join Date
    Mar 2011
    Posts
    548
    i had only found one place that had bent up cpm154
    i was forced to use it cause it was the last sheet i could find when crucible folded up
    you can lightly tweek it and get it how you want but you are many times jsut better off HTing it and keeping an eye on it then and straightening it at that point

  3. #3
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    3,973
    By the time I cut and profile blanks, some are not perfectly flat. I straighten by eye, sometimes I bang it a little bit on an anvil (gentle taps) and use a granite plate to check flatness.


    An expert is a man who has made all the mistakes which can be made, in a narrow field.
    -Niels Bohr

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  4. #4
    Senior Member

    Join Date
    Feb 2011
    Posts
    1,587
    Quote Originally Posted by l r harner View Post
    i had only found one place that had bent up cpm154
    i was forced to use it cause it was the last sheet i could find when crucible folded up
    Didn't Crucible reopen after being purchased following bankruptcy?
    Michael
    "Don't you know who he is?"

  5. #5

    Join Date
    Mar 2011
    Posts
    548
    yes tthey did but it left me with a nearly 2 year gap of hunting steel till they got more out to the supply houses (i am now happy to be working with the XHP steel and the great folks at cartec tho i have to buy from SB metals )

  6. #6
    Senior Member

    Join Date
    Feb 2011
    Posts
    1,587
    Oh, got it. Thanks for the info.
    Michael
    "Don't you know who he is?"

  7. #7

    Join Date
    Mar 2011
    Posts
    548
    my plan is to still work with cpm154 as its good steel too but the XHP is just a cleaner steel (onece you get to it in my old stock) like i said the new stuff is much better preped
    there is even talk of some of the off shoot alloys that will be based off the XHP base alloy to add jsut a bit more carbide formers

  8. #8

    Join Date
    Nov 2011
    Location
    Tilley, Alberta
    Posts
    12
    Now that I have a surface grinder I will surface grind each knife after I profile it.
    Jim

  9. #9
    Mike Davis's Avatar
    Join Date
    May 2011
    Location
    Jackson, MI.
    Posts
    1,527
    I have a 12 ton press (hand pump) that i use if i cannot get them straight by hand, just make sure to run a normalizing cycle before you HT, or that warp could haunt you.

  10. #10
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    3,973
    Quote Originally Posted by Boatbuilder View Post
    Now that I have a surface grinder I will surface grind each knife after I profile it.
    Jim
    You can straighten just about any steel by hand or overbending it in a vise before heat treating. Check on a granite plate for straightness - I make several small adjustments rather than one big, and check for straightness on a granite plate. I tap on a blade for clinking - that tells me if there is any bend on the blade that an eye might not register.

    A magnet chuck on your surface grinder will flatten your blank, and even if you surface grind it, that bend will still be there.



    M


    An expert is a man who has made all the mistakes which can be made, in a narrow field.
    -Niels Bohr

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts