Haha. I'd be all over one of these, if I didn't just receive a used one. The feedback never ceases to surprise me every time I use the Gesshin line.
Doh!!! Right before I plan on going over to the store.
Michael
"Don't you know who he is?"
I just placed an order for one of these and a 4000 Gesshin. I was very impressed with the 400 grit Gesshin so I am very excited for these new additions.
Twitter: @PeterDaEater
When it comes to the 4000 grit Gesshin, I currently use a DMT XXC for flattening, should I have another stone for smoothing the surface or will I be ok with just the DMT? If I do need a finer stone for smoothing the surface, what do you recommend?
Twitter: @PeterDaEater
Smoothing the surface is not always necessary... it depends on what you are doing with the stone... the coarser surface from the dmt is not a hinderance unless you are really trying to push the fine-ness of the edge... often times, the coarser surface helps the stone cut more quickly and have better tactile feedback.
If you do want to clean up the surface, you can use a synthetic nagura or diamond plate... i should mention that my gesshin 4k has destroyed a couple of my diamond plates (the diaface ones... the last much less time that they would if being used on other stones)
-Enjoy the ride. *** All statements made herein are my personal opinion and nothing more, regardless of tone or context. ***
Yes 400.... Thanks Tinh.
-Enjoy the ride. *** All statements made herein are my personal opinion and nothing more, regardless of tone or context. ***