Quantcast
Test knife and present for a customer.
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Test knife and present for a customer.

  1. #1
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,609

    Test knife and present for a customer.

    The weather here is dire, Cold winds and rain for weeks on end signalling the start of british summer, or descrnt into winter its hard to tell.
    Anyway i thought some knifey stuff would cheer me up.
    This funny little knife was a test piece from some test laminate offcut in my simple damascus and 01. Its a tiny chef knife really 125mm blade, 47mm deep, lots of taper very thin at tip and very convex at the heel. I've really enjoyed using it and found it most versatile for a small knife. Its robust enough to deal with chicken yet cuts onion etc with little resistance. So i thought i had better give it to a very nice cudtomer who has waited quite a while for some railings. He has allowed me to get distrscted with knifey stuff along the way so a fitting gift should be a knife.
    The wood is an australian wood from Mark. It suprised me as it didnt really show much at all until i buffed it. Its really come up nice.
    Thanks all
    Will

  2. #2
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,609
    Bad indoor pics i'm afraid but here is a couple more.





    The Knife size and profile is not a proposition for a pro chef I don't think... or meant to be...... I can imagine his wife using this all the time... But as always its great to hear what you think.

  3. #3
    A fat petty! Cute little bugger, I kinda like it, well done sir!


    Feel free to visit my website, http://www.rodrigueknives.com
    Email pierre@rodrigueknives.com

  4. #4
    Senior Member Johnny.B.Good's Avatar
    Join Date
    Aug 2011
    Location
    Bay Area, CA
    Posts
    2,956
    Cute little knife Will. I thought it might be a little deba at first glance...

    I'm sure your customer will be surprised and pleased by it.

    (I would like to see the railing you were commissioned to make too.)

  5. #5
    Senior Member
    WildBoar's Avatar
    Join Date
    Feb 2011
    Location
    NoVa
    Posts
    2,136
    Will, how can I get on your list for railings that you are too busy to get to?

    Nice knife -- that is a great gift!
    __________
    David (WildBoar's Kitchen)

  6. #6
    Senior Member DK chef's Avatar
    Join Date
    Mar 2011
    Location
    Denmark
    Posts
    230
    i like it

  7. #7
    Senior Member Deckhand's Avatar
    Join Date
    Jan 2012
    Location
    Costa Mesa California
    Posts
    1,737
    Thought the same thing cute deba looking knife would be fun as a single bevel. Either way it's nice. All your work always is.

  8. #8
    WillC's Avatar
    Join Date
    Jul 2011
    Location
    herefordshire uk
    Posts
    1,609
    Lol thanks Guys, I wouldn't hesitate to use it for Deba duty, that 01 is tough old stuff. The railings, not very interesting i'm afraid. I only took it on because it is an insurance claim and I didn't mind charging them "full wack" for the work. Payed the rent for a while. If it ever stops raining I might get them fitted too. In truth I'm just dying to focus on knives for a bit, maybe some nice arty jobs if they come along.

  9. #9
    Senior Member
    Join Date
    Mar 2011
    Location
    Cardiff, UK
    Posts
    801
    Looking good, I give it less than a month of them using it until they ask you to make them a matching chef knife

  10. #10
    Senior Member
    Join Date
    Mar 2011
    Location
    Gothenburg, Sweden
    Posts
    498
    That looks like one of those knive that are a bit unassuming in size but becomes the most used for all mixed tasks.
    very nice!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •