Mike Davis
Senior Member
- Joined
- May 2, 2011
- Messages
- 1,921
- Reaction score
- 0
I have been wanting to do some single bevel stuff for quite some time. I had one profiled and HT's with the bevel ground in for about 8 months now. I finally got my 48" platen in, so i decided to grind in the urasuki while i was putting the bevels on the last of Zitangy's petties. Now this is my first single bevel knife and it is a tester, so dont judge the lack of proper finishing lol.
Specs:
Blade; 210mm edge W2, with a real dirty 600 grit finish.
Thickness: 2.46mm . Bevel is 13mm tall.
Heel is 47.5mm tall.
Bevel side
Ura side
Choil/bevel
So let me have it!!! lol
Specs:
Blade; 210mm edge W2, with a real dirty 600 grit finish.
Thickness: 2.46mm . Bevel is 13mm tall.
Heel is 47.5mm tall.
Bevel side
Ura side
Choil/bevel
So let me have it!!! lol