Mike Davis
Senior Member
- Joined
- May 2, 2011
- Messages
- 1,921
- Reaction score
- 0
I had intended to do this knife as a passaround, but there is already a gyuto of mine working it's way around. So..I figured i would post it
Steel: O-1 core, clad in 33 layers per side of 1080/15N20 with a nickel layer between the core and cladding. Rc61
Length:270mm on edge 2.95mm at spine, 2.6mm halfway and full distal taper to the tip. Can get better [pics after work
Height:52.2mm
Handle: 2 tone Amboyna Burl, Blackwood ferrule/buttcap with blister koa spacers.
143mm long 20/24mm ferrule 26/28mm at buttcap.
Price is $775 + Shipping, will include says for an even $800 + shipping
Steel: O-1 core, clad in 33 layers per side of 1080/15N20 with a nickel layer between the core and cladding. Rc61
Length:270mm on edge 2.95mm at spine, 2.6mm halfway and full distal taper to the tip. Can get better [pics after work
Height:52.2mm
Handle: 2 tone Amboyna Burl, Blackwood ferrule/buttcap with blister koa spacers.
143mm long 20/24mm ferrule 26/28mm at buttcap.
Price is $775 + Shipping, will include says for an even $800 + shipping