Quantcast
Does Anybody Own a Bob Loveless Droppoint Hunter (see picture inside)
+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Does Anybody Own a Bob Loveless Droppoint Hunter (see picture inside)

  1. #1
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    4,084

    Does Anybody Own a Bob Loveless Droppoint Hunter (see picture inside)



    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  2. #2
    Senior Member Chifunda's Avatar
    Join Date
    Jun 2011
    Posts
    322
    Not any more...I've sold off or given away all my hunters.

    The one pictured in your link is an unusual version in that it has no thong hole in the butt and although it's difficult to say for sure, it seems to be missing the .030" red vulcanized fiber spacers Bob used between the tang and the handle slabs.

    I've handled dozens of Loveless knives and have never seen a drop point made like this. Beautiful example though.

  3. #3
    Senior Member daveb's Avatar
    Join Date
    Mar 2012
    Location
    Just outside Tampa
    Posts
    898
    I've got Beretta's Loveless version

    https://dl.dropbox.com/u/55001407/Share/IMAG0109.jpg

    Model 205a, aus-8 steel, made in Seki. Wanna trade?
    Dave
    Older and wider.

  4. #4
    Senior Member
    Join Date
    Mar 2011
    Posts
    542
    I have a shipping box of his stamped from the Riverside location... does that count?

  5. #5
    Senior Member Chifunda's Avatar
    Join Date
    Jun 2011
    Posts
    322
    I have the note Bob included with the last knife he made for me. Means more to me than the knife itself...which I gave to a friend.

    Still can't believe he's gone.

  6. #6
    Senior Member

    Join Date
    Mar 2011
    Location
    Sebastopol, CA
    Posts
    210
    Thinking about integral hilts again? Back to work.

  7. #7
    Marko Tsourkan's Avatar
    Join Date
    Feb 2011
    Location
    Westchester, NY
    Posts
    4,084
    I am not much of a hunter, but I love the look of that knife. Simple and elegant. Classic -

    Have steel, would like to try, need some reference on thickness.


    M


    "If there’s something worth doing, it’s worth overdoing.” - An US saying.

    If my KKF Inbox is full (or not), please contact me via Email: anvlts@gmail.com

  8. #8
    Senior Member
    Join Date
    Mar 2011
    Posts
    542
    Marcus Lin has become real good doing the Loveless stuff.

    http://www.mileswelze.com/Others_Fixed_MLDPH.html

  9. #9
    Senior Member
    Join Date
    Mar 2011
    Location
    Denton, Tx
    Posts
    510
    I don't own one but I'm from Riverside, Ca and my dad has a knifemaking buddy that was really close to him. He has a Loveless that he showed me. It was very nice. Thats all I got.

  10. #10
    Senior Member Chifunda's Avatar
    Join Date
    Jun 2011
    Posts
    322
    Quote Originally Posted by Marko Tsourkan View Post
    I am not much of a hunter, but I love the look of that knife. Simple and elegant. Classic -

    Have steel, would like to try, need some reference on thickness.


    M
    Marko,

    Bob made his hunters from 3/16" flat stock he had blanchard ground flat and parallel. Tangs were tapered to about 1/16" at the butt, although this could vary somewhat. The example in the photo has a four inch blade, so you can figure the other dimensions using that as a scale. Bob was always tweaking his designs; a drop point hunter made one year would not necessarily be identical to one made the year before or the year after, so you've got a little wiggle room in your calculations.

    Hope this helps.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts