Quantcast
SCARY Kickback!
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: SCARY Kickback!

  1. #1
    Still Plays With Blocks
    The BoardSMITH's Avatar
    Join Date
    Feb 2011
    Location
    Home Furnishings Capital of the World, High Point, NC
    Posts
    510

    SCARY Kickback!

    Yesterday while ripping some 4/4 walnut stock, I experienced the scariest kickback I have ever had on a table saw. The wood kicked back and took the blade guard with it. Yes the blade guard came completely loose and ended up on the floor with the walnut stock. After I calmed down, I examined the guard. There were tooth marks on one side of the splitter, on the inside of the side supports and even one of the pawls had been hit. The blade fared even worse. Of the 20 carbide teeth, 2 were missing completely and 9 more were damaged. SO much for a $100 blade.

    As for me, I have a small cut on my right palm just between the index and the next finger. Lucky I guess!

    I called the manufacturer afterwards and the rep at Grizzly didn't seem to concerned. So this morning I made a closer inspection of the saw and found the splitter is bent and the dust chute under the blade was cracked. I called Grizzly and asked for replacement parts which they agreed to. When I asked for a replacement blade due to their faulty attachment of the guard I was told the request would have to go to someone higher up for approval.

    I also contacted the CPSC about the attachment process of the guard. All that holds it is a friction lever that is obviously inadequate for the job. It should have held! We will see where this goes.

  2. #2
    Senior Member chinacats's Avatar
    Join Date
    Mar 2012
    Posts
    2,288
    Glad to hear you escaped with only minor injuries!
    one man gathers what another man spills...

  3. #3
    Senior Member Deckhand's Avatar
    Join Date
    Jan 2012
    Location
    Costa Mesa California
    Posts
    1,737
    Scary glad you are O.K. And not injured worse than you were. Hope the palm cut heals quickly.

  4. #4
    Senior Member brainsausage's Avatar
    Join Date
    Feb 2012
    Location
    Portland, Maine
    Posts
    1,950
    Yikes! Good to hear you got out of it relatively unscathed. Bad to hear about your customer service experience...

  5. #5
    Dave Martell's Avatar
    Join Date
    Feb 2011
    Location
    Fleetwood, PA
    Posts
    9,286
    Woh whats going on here, I just got through reading about Randy HHH's injuries and Bill B's impending wild fire, and now this. David that's flat out scary stuff. I bet you'll be weary of that machine for some time to come. Glad that you didn't get speared or anything like that though.

  6. #6
    Senior Member Mr.Magnus's Avatar
    Join Date
    Jul 2012
    Location
    Stockholm, Sweden
    Posts
    786
    glad u didnt get shot by one of those teeth. i also work with big table saw's but for aluminium and a co worker was cutting a solid 80mm block of aluminium about 3 weeks ago, and i was standing about 10 meters away milling and a tooth from the blade came of and passed my head with an inch and right thruw the wall next to me. so i was glad the wall took the hit that time and not me :P. thay come off the blade like bullets witch is pretty scary.

  7. #7
    Senior Member

    SpikeC's Avatar
    Join Date
    Feb 2011
    Location
    PDX
    Posts
    3,773
    Kick backs are one of the most adrenaline producing things I can imagine! It is especially scary when all of the safety gear is in place. Congratulations on not getting badly hurt!
    Spike C
    "The Buddha resides as comfortably in the circuits of a digital computer or the gears of a cycle transmission as he does at the top of a mountain."
    Pirsig

  8. #8
    Senior Member Crothcipt's Avatar
    Join Date
    Jan 2012
    Location
    wyoming, closer to nowhere than somewhere.
    Posts
    3,502
    I guess I shouldn't walk into a shop for a while. I have a problem with murphys law happening when I am around.
    Chewie's the man.

  9. #9

    Join Date
    Mar 2011
    Location
    Rockport, TX
    Posts
    4,892
    whoa.

  10. #10
    Senior Member
    sachem allison's Avatar
    Join Date
    Aug 2011
    Location
    nyc
    Posts
    3,835
    happy you are alright.
    I haven't lived the life I wanted, just the lives I needed too at the time.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts