Quantcast
Shibazi 210 Carbon Cleaver Re-handle and Saya
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Shibazi 210 Carbon Cleaver Re-handle and Saya

  1. #1
    Senior Member jayhay's Avatar
    Join Date
    May 2012
    Posts
    351

    Shibazi 210 Carbon Cleaver Re-handle and Saya

    I recently moved to a new area of Philly and there tons of Asian markets around. Let me say, I'm in freaking love. That smell of durian and star anise always gets me excited to hunt for new things to try, and usually makes my friends want to leave. I also enjoy picking through the piles and piles of knives trying to find something something cheap and in carbon. On my first dig through the pile I ran across a carbon Chinese cleaver by Shibazi. The model was listed as the 210-1, which is interesting because they make no mention of it on their website. It was $20 bucks so I grabbed it up. And being that I've been eyeing a CCK recently, but didn't want to buy it through the normal source, I was pumped to find this. And I haven't seen many (or any) threads about it, so I was excited to post about something new.

    Long story short, it's very similar to a cck. Cheap, rough f&f and kurouchi, normal Chinese handle and no rounded spines etc. Here are my measurements,

    Spine at handle: 2.2mm
    Spine mid: 2.1mm
    Spine tip: 2.1mm
    Blade lenght: 9"

    So, it's thin. And after I rounded the spine and choil, it's very comfortable to hold. I also started to remove the kurouchi, but it's pretty tough stuff. Much harder to remove than on a cheap Tojiro. The steel itself sharpens up very nicely. Fast to cut fresh bevels and raise a burr. It comes pretty dull, so a good sharpening is very necessary. Holds an edge well too. A buddy at work bought one up too and put it through hell one day prepping about 100lbs of meatballs. He cut everything with it, meat, onions, garlic and crusty old bread (all the normal meatball stuff). The cleaver ate it up and asked for more. Still had a nice toothy edge on it afterwards. I was really impressed.

    This knife also gave me the opportunity to try out handle making/re-handling. It was easy to strip off the old handle by unbending the end of the tang off the handle. With a few good tugs it really did slip right off. I made the new handle with some bass wood and the ferrule from a mystery piece of hardwood laying around. I used a 1x30 belt sander to fashion the male end of the handle, and the ferrule was carved out with wood chisels. I had to cut some metal off the tang to make it more size appropriate for the handle. I installed the handle by drilling a hold a tad smaller than the tang, so I could get a nice friction fit. I also used some good epoxy as an insurance policy. After some good whacks with a rubber mallet, it was on the cleaver! Booyaa!

    Then I made a simple saya by carving out one side of a piece of bass wood and gluing to an un-carved piece. Sand and rub with some tung oil, complete! Hope you all enjoy and I'd love to hear your thoughts!

    Name:  1.jpg
Views: 287
Size:  11.9 KB Name:  2.jpg
Views: 57
Size:  10.4 KB Name:  3.jpg
Views: 57
Size:  12.4 KB Name:  4.jpg
Views: 49
Size:  8.1 KB Name:  5.jpg
Views: 44
Size:  7.5 KB Name:  6.jpg
Views: 44
Size:  11.5 KB Name:  7.jpg
Views: 45
Size:  9.8 KB Name:  IMG_8509.jpg
Views: 49
Size:  11.6 KB Name:  IMG_8510.jpg
Views: 49
Size:  10.0 KB Name:  IMG_8512.jpg
Views: 44
Size:  5.8 KB Name:  IMG_8515.jpg
Views: 46
Size:  6.5 KB Name:  IMG_8516.jpg
Views: 48
Size:  9.1 KBName:  IMG_8519.jpg
Views: 44
Size:  6.5 KB Name:  IMG_8520.jpg
Views: 47
Size:  16.8 KB Name:  IMG_8522.jpg
Views: 45
Size:  8.1 KB Name:  IMG_8523.jpg
Views: 46
Size:  6.9 KB Name:  IMG_8525.jpg
Views: 44
Size:  8.5 KB

  2. #2
    Senior Member K-Fed's Avatar
    Join Date
    Mar 2011
    Location
    Palm City, FL
    Posts
    765
    Nicely done sir.

  3. #3
    Senior Member heirkb's Avatar
    Join Date
    Mar 2011
    Posts
    898
    Very nice! I've been wanting to try my hand at making handles. Now I might have to make one for the cheapo Carbon cleaver I have. Off to buy even more basswood (I've already been making basswood sheaths like you).

  4. #4
    Senior Member mpukas's Avatar
    Join Date
    Apr 2011
    Location
    Gyptuckey, CO
    Posts
    797
    Very well done. I love finding an inexpensive gem like that, and the handle you made makes it that much better. I really like the handle you've made - for a Chinese cleaver, I find that many re-handle we see w/ a wa-handle just don't work. But the handles that usually come on Chinese cleavers are usually too short. And, I refer handles that are rectangualr in shape so they are taller than wide. This looks great! I think I would have left the KU finish on though...
    Shibui - simplicity devoid of unnecessary elements

  5. #5
    Senior Member jayhay's Avatar
    Join Date
    May 2012
    Posts
    351
    TY guys! Polishing a turd is fun, isn't it?

    -heirkb, go for it man! It's a fun project to take on. All you need is a few tools and a good bit of patience

    -mpukas, thanks on the compliments. I would say the handle is about the same length as the original. The new handle does feel much better in the hand on the knife. And I too generally prefer taller than wide. As for the kurouchi, it was real messy in its original state. And it usually comes off overtime, so I thought better just to remove it.

  6. #6
    Senior Member markenki's Avatar
    Join Date
    Apr 2012
    Location
    Issaquah, WA
    Posts
    683
    Very nice! I like it.

  7. #7
    Canada's Sharpest Lefty Lefty's Avatar
    Join Date
    Mar 2011
    Posts
    5,102
    Looks great!
    09/06

    Take a look around at: www.sharpandshinyshop.com

    Email me at: tmclean@sharpandshinyshop.com

  8. #8

    Join Date
    Jul 2012
    Location
    Ghent, NY
    Posts
    940
    Nice looking cleaver and handle - I gotta redo my Lamson one of these days.

  9. #9
    Senior Member

    Join Date
    Feb 2011
    Location
    Fort Worth, TX
    Posts
    568
    Very nice!

  10. #10
    Senior Member Jmadams13's Avatar
    Join Date
    Sep 2012
    Location
    South Central PA
    Posts
    995
    Threads like this make me wish we had Asian markets around here. Lots of mexican markets, but no Asian.

    Nice handle, and nice cleaver. Now go to the market buy and send me one so I can copy cat you, lol
    "This is grain, which any fool can eat, but for which the Lord intended a more divine means of consumption.. Beer!" -Robin Hood, Prince of Thieves, Friar Tuck

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts