Quantcast
Kono HD review from a white#2 whore
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Kono HD review from a white#2 whore

  1. #1
    Senior Member Cadillac J's Avatar
    Join Date
    Mar 2011
    Location
    Detroit
    Posts
    621

    Kono HD review from a white#2 whore

    So it has been a week with my 270 Konosuke HD suji now, and I think I’ve had enough time with it to make my personal comparison between the white#2 which I know and love.


    The HD steel felt really good on the stones, and although it didn’t quite have that refinement of white#2, it was closer than I expected it to be for semi-stainless steel. However, the white can take a keener edge versus the HD from my experience…I sharpened both sides with the spine maybe 3 millimeters off the stone face with a 90/10 asymmetry with a slight hamaguriba on the face(just like with my white), but upon using it I noticed minute chipping for the first time ever…but instead of re-sharpening with a more obtuse angle, I just added a micro-bevel (which I normally don’t do) and the issue went away with no loss in performance.

    I can say that I think the white#2 gets just a tad bit sharper, but the difference is barely noticeable…but what IS noticeable is how the HD holds that edge for a longer period of time. As far as edge retention and holding abilities, it seems very similar to that of the 19c27 in my Suisin inox honyaki petty. Although steels like the HD/CarboNext are referred to as ‘semi-stainless’, my 19c27 seems to have more patterns/coloring on the blade over longer use than my CarboNext does—hmm.

    The difference between the 300 and 270 sujis is much more than I thought it would be—their profiles and blade shapes aren’t just smaller/larger copies of one another at all…I actually prefer the 270 shape better as it is narrower and more streamlined. The most noticeable difference in use and cutting is the balance point (as you can see in the picture). The HD 270 balance point is a millimeter or so in front of the ferrule, while both the white#2 gyuto(270) and suji both are more blade-heavy with the balance point almost an inch in front of the choil. Not sure if this is HD/white#2 or just size specific, or possibly has anything to do with the weight difference of the ebony handle, etc? (maybe Jon could comment on the 270 white#2 suji balance point) But it makes for a different cutting experience—I actually like both depending on what type of cutting I am doing.

    After using both, I really can’t say I prefer or favor the white#2 or the HD…both are equally awesome, just depends on what your needs and likes are. For now, the HD is going to replace my 300 as my go-to knife for a while just because it is new and I want to get more in touch with it. This isn’t a very detailed review, but hopefully gave some insights to anyone who is deciding between the two lines. Here are some pictures…

















  2. #2
    Senior Member
    Join Date
    Feb 2011
    Posts
    1,627
    With the differences in balance, what tasks do you use the different knives for?
    Michael
    "Don't you know who he is?"

  3. #3
    Senior Member UglyJoe's Avatar
    Join Date
    Mar 2011
    Posts
    434
    Beautiful knives and looking forward to hearing more thoughts on them as you use them more. As an aside, where did you get the knife rack that you are displaying them on?

  4. #4
    Senior Member Cadillac J's Avatar
    Join Date
    Mar 2011
    Location
    Detroit
    Posts
    621
    @mhlee - I don't choose one or the other based on what I'm cutting, it is just that the HD seems more agile/maneuverable with tip work, while the 300 seems weighted better for push-cutting at the heel/mid point. Both are good for all types of cuts, I just wanted to point this out as it was a bit unexpected when I first picked it up.

    @UglyJoe - that rack was built by my father-in-law...I just showed him the one from Korin and he threw this together for me at the end of last year. Here is a side picture.



    Also, I noticed how much lighter the ferrule is in real life versus the pics that Jon sent me before shipping. I was expecting more of a light brown color, but it was blonde in person...I like it, but just wanted to mention that different lighting can alter the perception of specific colors.

  5. #5
    Senior Member
    Join Date
    Feb 2011
    Posts
    3,902
    Very nice write up!

    Ok your house is on fire and you can only grab one of the knives...Which one?

  6. #6

    JohnnyChance's Avatar
    Join Date
    Feb 2011
    Location
    CT
    Posts
    3,030
    I am in need of a 270mm semi or full stainless wa suji. And I don't have a Kono yet (don't really like their gyuto profile). For some reason I like trying a different brand every time rather than buying more of the same.

  7. #7
    Senior Member Cadillac J's Avatar
    Join Date
    Mar 2011
    Location
    Detroit
    Posts
    621
    Quote Originally Posted by Jim View Post
    Very nice write up!

    Ok your house is on fire and you can only grab one of the knives...Which one?
    Oh man, why do you have to put it like that. Hmm, in that case, I would probably take the HD just because I like the overall size better and the handle is pretty pimp.

    JohnnyC, I really think you'd like this HD suji a lot...unless you go custom, I don't really see much that can beat it right now.

  8. #8
    Senior Member

    Join Date
    Feb 2011
    Location
    Pensacola, FL, USA
    Posts
    3,815
    Quote Originally Posted by Jim View Post
    Very nice write up!

    Ok your house is on fire and you can only grab one of the knives...Which one?
    That sounds like the topic of a new thread to me.

  9. #9

    JohnnyChance's Avatar
    Join Date
    Feb 2011
    Location
    CT
    Posts
    3,030
    Quote Originally Posted by Cadillac J View Post
    JohnnyC, I really think you'd like this HD suji a lot...unless you go custom, I don't really see much that can beat it right now.
    I like how much slimmer it is than the 300mm. Again what I would be looking for, the ones with more heel dont feel much different from a gyuto. And the ebony with blonde horn is nice.

    Cut any potatoes or big items with it yet? How is it wedging wise?

    And I like your balancing act photo. Will have to add that one to my write ups.

  10. #10

    Join Date
    Mar 2011
    Location
    Wine Country, CA
    Posts
    69
    Not to highjack the thread, but can someone explain to me why there is such a large gap between the ferrule and the machi on Konosukis. I don't see this on other J knives (I have a Konosuki stainless 240 gyuto - which I'm very happy with - just don't understand the gap).

    James

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts