Quantcast
Carving Knife and Chinese Cleaver advice
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Carving Knife and Chinese Cleaver advice

  1. #1

    Join Date
    Mar 2012
    Posts
    14

    Carving Knife and Chinese Cleaver advice

    Hello,

    I am looking for a new high-end carving knife and Chinese cleaver. I think what I am looking for is stainless, but priority rests in the sharpness. Other things to consider are aesthetics and feel in hand (but most high-end knifes will cover these aspects anyway).

    I am looking for stainless I think, because I have a Takeda Gyuto AS 240mm, and while I like this knife a lot (its something of a piece of artwork) I don't think I love it. Mine stains RATHER fast. Within minutes of cutting even non-acidic foods, it's already rusting. This rusting is a pain to clean. I also don't think the rusting pain outweighs the sharpness (which while sharp, I feel could be sharper).

    So if you all have a recommendation on the best carving knife and cleaver to purchase I'd really appreciate it. Price is not a huge deal but probably don't want to spend more than $400 a knife.

  2. #2
    Senior Member jimbob's Avatar
    Join Date
    Dec 2012
    Location
    Melbourne
    Posts
    424
    +1 looking for good cleaver

  3. #3
    Senior Member
    Join Date
    Dec 2012
    Location
    New Zealand
    Posts
    112
    Look into "forcing a patina" on your Takeda, with mustard or similar, or if you end up sending it to be sharpened by one of the guys here inquire if they can do it for you.

    Check out the jki site, he has plenty of great knives on there, as far as cleavers go cck make some good sturdy cleavers, ive just bought one myself.
    Alternatively Google 'Japanese knife' and the first 3 results are good online j knife suppliers.

  4. #4

    echerub's Avatar
    Join Date
    Mar 2011
    Location
    Toronto, Canada
    Posts
    1,776
    Hmmm. Stainless and good for the cleaver is a bit more difficult than for the slicer. At least for me, Takeda's knives have not been particularly reactive, so if you're experiencing issues with them you might have similar issues with other carbon steels. At least with anything with non-stainless cladding.

    Off the top of my head, I think the Hattori FH cleaver would be a good choice. I've had to resist pulling the trigger on that thing myself quite a few times.

    Devin Thomas makes a mean cleaver in AEBL, but I think that will go over your budget.

    Hmm... maybe someone knows if there's a Gesshin Ginga or Ashi Hamano cleaver in stainless. That could be an option to consider.
    Len

  5. #5

    echerub's Avatar
    Join Date
    Mar 2011
    Location
    Toronto, Canada
    Posts
    1,776
    Quote Originally Posted by chrisg View Post
    aesthetics and feel in hand (but most high-end knifes will cover these aspects anyway).
    Many, but not all
    Len

  6. #6
    Senior Member Notaskinnychef's Avatar
    Join Date
    Nov 2012
    Location
    Victoria, BC, Canada
    Posts
    535
    side note, im looking to get a crappy one just to try it out, any thoughts on this:

    http://www.ebay.ca/itm/Winco-Heavy-D...#ht_1093wt_954

    cant go wrong for under 20 bucks right?

  7. #7

    echerub's Avatar
    Join Date
    Mar 2011
    Location
    Toronto, Canada
    Posts
    1,776
    Are you looking for a slicing "cleaver" - basically taking the role of a gyuto - or a chopping cleaver that'll go through bones & whatever else gets in its way? The one there via the link is the chopping kind.

    Chinese cleavers themselves do come in various weights and thicknesses, but most of the time when folks talk about them it's the thin slicing kind that's being discussed. The thin kind should only be used on what you'd use a thin gyuto on.
    Len

  8. #8
    Senior Member Notaskinnychef's Avatar
    Join Date
    Nov 2012
    Location
    Victoria, BC, Canada
    Posts
    535
    More of a chopping one, since I have my newly purchased CN that I use whenever I can. I want to get a beefy one, so I thought that this ebay one would work

  9. #9
    Senior Member jimbob's Avatar
    Join Date
    Dec 2012
    Location
    Melbourne
    Posts
    424
    just ordered the cck 1303 to see my cleaver interest. From a site cookwarekitchenware.com. Seemed slightly dodgy but its paypal so got some insurance. $58 USD with postage to aus... ill let you know if i get it!

  10. #10
    Senior Member
    Join Date
    Dec 2011
    Location
    Sydney
    Posts
    1,121
    Just saw this Ikkanshi Tadatsuna stainless just put up for sale at aframes.


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts