Quantcast
Tojiro Flash DP Damascus Paring Knife
+ Reply to Thread
Results 1 to 3 of 3

Thread: Tojiro Flash DP Damascus Paring Knife

  1. #1
    Senior Member
    Join Date
    Dec 2012
    Location
    Tokyo, Japan
    Posts
    158

    Tojiro Flash DP Damascus Paring Knife

    I'm looking for my first proper paring knife and am considering either the 9cm (FF-PA90) or 10cm (FF-PA100) length from the Tojiro DP Damascus Series. My primary attraction to these knives are their very comfortable handles. Beyond the 1cm difference in length, the main difference between the two is the shape of the blade, the 9cm being straight. I imagine that would also make it easier to sharpen consistently. My primary usage will be with apples and pares and such. Here in Tokyo I can get either for about 6000yen so cost isn't a significant factor. Any words of advice? What do you think?
    Fudoushin Bujinkan Dojo: http://fudoushin.com/

  2. #2
    Senior Member NO ChoP!'s Avatar
    Join Date
    Apr 2011
    Location
    Clayton, NC- surrounded by lots of trees
    Posts
    2,082
    If its just a choice between 3.5 and 4 inch, I would go 3.5. Noting the inhand work you plan to do, it will be adequate.

    I have a couple Flash from years back, and use them in the home.
    They are handle heavy. The fit and finish, especially the stainless insert in the handle, is not perfect. The steel is chippy.
    That being said, they are decent performers with a nice damascus pattern.
    The difference between try and triumph is a little "umph"! NO EXCUSES!!!!!!!
    chefchristophermiller@yahoo.com

  3. #3
    Senior Member
    Join Date
    Dec 2012
    Location
    Tokyo, Japan
    Posts
    158
    Quote Originally Posted by NO ChoP! View Post
    If its just a choice between 3.5 and 4 inch, I would go 3.5. Noting the inhand work you plan to do, it will be adequate.

    I have a couple Flash from years back, and use them in the home.
    They are handle heavy. The fit and finish, especially the stainless insert in the handle, is not perfect. The steel is chippy.
    That being said, they are decent performers with a nice damascus pattern.
    Thank you for the feedback. As mentioned the ergonomic handle is the biggest attraction for me, the damascus doesn't really do much for me one way or the other. What else would you recommend that would be good steel (carbon or stainless) with good geometry and comfortable in hand without breaking the bank?
    Fudoushin Bujinkan Dojo: http://fudoushin.com/

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts