SOLD 246mm X 57mm W2/Amboyna Gyuto W/Hamon

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MSicardCutlery

Full-time Knifemaker-Canadian Mazaki
KKF Sponsor
Joined
Feb 28, 2022
Messages
2,256
Reaction score
6,649
Location
Canada
Here's another one with a highly active hamon, and some very nice stabilized amboyna.

  • Blade: 247mmx57mm W2 (63/64hrc)
  • Neck: 19mmx22mm
  • Handle: 109mm, tapering from 22.8mmx21.5mm to 20.6mmx17.9mm
  • POB: 65mm from handle
  • Spine: 2.6mm at the neck, 1.8mm at 13cm, 1.04mm 1cm from the tip
  • Grind: flat to convex
  • Weight: 181g
I'm sad to say that at some point during the glue up one corner of the neck was lifted out of the front spacer, and consequently the fit is not perfect. Epoxy did fill the gap, however and it remains seamless and solid.
The edge presently sits at about .005" or around .12mm.

In light of that tragic flaw, I'm only asking $210 U.S for this one, shipping included.

DSC04799.JPG
 

Attachments

  • DSC04798.JPG
    DSC04798.JPG
    140.1 KB
  • DSC04800.JPG
    DSC04800.JPG
    174.9 KB
  • DSC04802.JPG
    DSC04802.JPG
    329.7 KB
  • DSC04813.JPG
    DSC04813.JPG
    372.4 KB
  • DSC04806.JPG
    DSC04806.JPG
    73.1 KB
  • DSC04805.JPG
    DSC04805.JPG
    306.5 KB
  • DSC04814.JPG
    DSC04814.JPG
    91.1 KB
Back
Top