WTS 247mm AEB-L Gyuto w/k-tip

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MSicardCutlery

Full-time Knifemaker
KKF Sponsor
Joined
Feb 28, 2022
Messages
1,686
Reaction score
4,825
Location
Canada
Here's a solid one. While not a true kiritsuke I did put a k-tip on it, mostly just for the sake of experimentation. It's heavy, and thick, but still cuts very easily owing to a very thin edge that tapers from approximately .1mm at the heel, to zero at halfway and remaining so to the tip.
  • Blade: 247mmx57mm AEB-L (63hrc) 600 grit hand finish
  • Neck: 18mmx20mm
  • Handle: 122mm, tapering from 26.5mmx23.5 to 22.0mmx18.5mm, oil finished ebony with brass and stainless spacers.
  • POB: 45mm from handle
  • Spine: 2.54mm at the neck, 1.91mm at 13cm, 1.15mm 1cm from the tip
  • Grind: flat to convex
  • Weight: 219 grams
  • Relieved spine and choil
It picked up a few scuff marks on one side and appears to have a .5mm bow to the left, that can't seem to force out. On an unrelated note, while I was working on this knife it fell off my work bench and landed almost flat on a concrete floor. The only damage sustained was a minor dent near the heel that has since been erased.

Asking $220 $200 U.S, shipping included in North America, for Europe and Australia I will cover the first $25 U.S of shipping.

20220318_113404.jpg
 

Attachments

  • 20220318_113330.jpg
    20220318_113330.jpg
    138 KB · Views: 27
  • 20220318_113426.jpg
    20220318_113426.jpg
    111.5 KB · Views: 28
  • 20220318_113438.jpg
    20220318_113438.jpg
    81.5 KB · Views: 27
  • 20220318_113447.jpg
    20220318_113447.jpg
    37.4 KB · Views: 38
  • 20220318_113503.jpg
    20220318_113503.jpg
    79.2 KB · Views: 56
  • 20220318_113529.jpg
    20220318_113529.jpg
    35.9 KB · Views: 57
Last edited:
Back
Top