Happy Friday Everyone!
A more conventional suji this time, a little thicker an stiffer than the last. I must confess on this one the blade seated a little crookedly, it's out to the left approximately 1mm-1.5mm at the tip. It's not very obvious unless looking straight down the handle, and shouldn't impact function but, full disclosure, some things shouldn't be surprises. Corrected!
A more conventional suji this time, a little thicker an stiffer than the last.
- Blade: 250mmx40mm AEB-L (63hrc)-320 grit hand finish
- Neck: 15mmx21mm
- Handle: 127mm, tapering from 20.8mmx24.1mm to 18.1mmx22.0mm, burned oak, oiled and waxed.
- POB: 65mm from handle
- Spine: 2.65mm at the neck, 2.29mm at 13.5cm, .99mm 1cm from the tip
- Grind: flat to convex RH bias
- Weight: 135g
- Edge: .1mm-0
Attachments
Last edited: