Hello All,
The latest and greatest in the latest and greatest forging cutlery steel available. This knife was intended as more of a workhorse than my typical midweight-laser profiles. The etch is quite light on this one and it took some effort to get clean pictures of the blade itself.
The latest and greatest in the latest and greatest forging cutlery steel available. This knife was intended as more of a workhorse than my typical midweight-laser profiles. The etch is quite light on this one and it took some effort to get clean pictures of the blade itself.
- Blade: 270mmx47mm Apex Ultra/15n20 san-mai ~67 HRC, 1200 grit finish
- Neck: 18mmx19mm
- Handle: 127mm, tapering from 24.6mmx22.6mm to 21.7mmx19.2mm, burned oak, oil finished and waxed
- POB: 72mm from handle
- Spine: 4.10mm at the neck, 2.86mm at 14.5cm, .79mm 1cm from the tip
- Grind: flat to convex RH bias
- Weight: 216 grams
- Relieved choil and spine
- Edge: .1mm
Last edited:
