Presenting...this absolute monster.
This beast has a 52100 blade finished to 600grit, a stippled copper pin, stippled spacer, and an oiled and buffed ebony handle.
The POB is about 70mm out from the spacer, clearance is 35mm, the neck is 22mm wide and 22mm long. The edge length is 335mm.
The blade is 2.5mm thick at the neck, 1.76mm at 16.5cm, and .88mm 1cm from the tip, and roughly 63hrc. The edge is ground to zero and the blade is lightly convexed. The spine and choil have been rounded and polished. The handle tapers from 28.2mmx20.4mm to 24.4mmx17.0mm, and is 125mm long. The overall weight is 291g.
All the pictures were taken with the knife unsharpened, but it has since been sharpened, and wow, what a wicked edge.
Asking$350 $300 $250 $220 USD shipping with insurance included, in North America, for Europe and Australia I will cover the first $32 U.S of shipping.
If you have any questions don hesitate to ask
This beast has a 52100 blade finished to 600grit, a stippled copper pin, stippled spacer, and an oiled and buffed ebony handle.
The POB is about 70mm out from the spacer, clearance is 35mm, the neck is 22mm wide and 22mm long. The edge length is 335mm.
The blade is 2.5mm thick at the neck, 1.76mm at 16.5cm, and .88mm 1cm from the tip, and roughly 63hrc. The edge is ground to zero and the blade is lightly convexed. The spine and choil have been rounded and polished. The handle tapers from 28.2mmx20.4mm to 24.4mmx17.0mm, and is 125mm long. The overall weight is 291g.
All the pictures were taken with the knife unsharpened, but it has since been sharpened, and wow, what a wicked edge.
Asking
If you have any questions don hesitate to ask
Last edited:
