Clearing house of some older work.
All of these knives are basically identical except the handle colours. Two of them are older and have pointy heels and straight handles, , one is a transitional model with a radiused heel but no taper, and two of them are my final rendition of this pattern and have rounded heels and tapered handles.
First up Orange/Silver, this is the oldest of the bunch.
The spine tapers from 1/8" (3.2mm) thick at the tang down to approximately .055" (1.4mm) at the halfway point, to .035" (.88mm) 1/2" 12.7mm) behind the tip.
Asking$220 $180 U.S shipping included.
All of these knives are basically identical except the handle colours. Two of them are older and have pointy heels and straight handles, , one is a transitional model with a radiused heel but no taper, and two of them are my final rendition of this pattern and have rounded heels and tapered handles.
- W2 tempered to approximately 64 hrc with drawn spines and tangs.
- ~2" x 8.5" and 13" overall
- Pinned and epoxied resin scales
- 600 grit finished blades
- radiused and polished spines and choils
- Flat/convex ground to zero before sharpening
- 303 SS pins
- All weigh between 165 grams and 180 grams averaging in the 170's
First up Orange/Silver, this is the oldest of the bunch.
The spine tapers from 1/8" (3.2mm) thick at the tang down to approximately .055" (1.4mm) at the halfway point, to .035" (.88mm) 1/2" 12.7mm) behind the tip.
Asking
Attachments
Last edited: