• If you have bought, sold or gained information from our Classifieds, please donate to Kitchen Knife Forums and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD 60mm thin kanna

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 29, 2018
Messages
2,029
Reaction score
4,040
$45

270g
59mm x 113mm x 7.5mm
A thinner lighter kanna with a lower angle too
Has the shige kanji, so I thought it might be part of the aizu shige clan but not sure

Does not have wrought iron. It does have a luscious feeling iron with subtle waves, with parallel wavy lines like wrought iron. The iron abrades very nicely and I prefer it to some wrought irons actually. Rust on ura. Ura makes full contact along the edge, but some pitting. Good stone tester. Steel is very abradable and sharpanable, has a lot of similarities to Sakai white.

PXL_20230603_054223566.jpg
PXL_20230603_054238315.jpg
PXL_20230603_054245631.jpg
PXL_20230603_054902180.jpg
PXL_20230603_054910897.jpg
PXL_20230603_054919645.jpg
PXL_20230603_054849199.jpg
PXL_20230603_055644158.jpg
 
Last edited:
Back
Top