Combined my list of knives up for sale.
Bloodroot, Isasmedjan, Tsourkan, Andrei, Tim Johnson
Isasmedjan Nakiri 204x63
Grind is slightly lefty.
Brand New never used (I bought a ton of Nakiri knives at the same time)
Specs
Steel:100cr6 at 62-63 hrc
Cladding: Mild Steel
Thickness 2.6>1.9mm
Weight 261 grams
Handle is beautiful single piece of Rowan Wood
$350 Conus
Sold! Marko Tsourkan 180mm gyuto in A2 - $340 Conus
Love everything about this knife - profile, grind, steel (great edge retention yet easy to sharpen, not too reactive). The choil shot tells a lot. A previous owner lost ~2mm at the tip. but ground it at the spine to fix it. Besides that, only stropped on Jnats. Used it mostly on fruit and a few onions.
Not the best pictures (bought on bst) SOLD - Tsourkan & M. Hinoura
154g
174mm edge length
44mm heel height
It was used just once by previous owner to cut a lime. It is otherwise like new with a very small mark from the cut.
Price $500 Conus open to offers
Specs:
170X49MM
175 g
Sawblade @64 Hrc
Handle Copper Beech and Blackwood
Andrei Gyuto sold!
Used been on my knife rack the last few months. What a performer!
223X59mm
WX-15 steel it is his 52100 equivalent
White Acacia Handle
207g
Asking $280 Conus
Tim Johnson
Oxford, MA
Asking $200.00 CONUS
Used has been on my rack but well cared for. Never sharpened, sharp but could be brought back to razor sharp when it arrived.
This is a one and done petty for me, these blades are ground to handle abuse. I love it!
Specs:
steel: 15n20
source: reclaimed bohler uddelholm bandsaw steel
Heat Treat: Jarod Todd @ RC63-64
Finish: fine scotchbrite with forced patina
165mm edge length x 37mm tall at heel
Balance point @ Ferrule
Spine and Choil chamfered
Cast aluminum honeycomb handle
Cutting Geometry: fine distal taper, convexed bevels, edge finished on shapton pro ceramics. T
Handles: hidden tang, micarta frame style. bonded with west systems g-flex.
Bloodroot, Isasmedjan, Tsourkan, Andrei, Tim Johnson
Isasmedjan Nakiri 204x63
Grind is slightly lefty.
Brand New never used (I bought a ton of Nakiri knives at the same time)
Specs
Steel:100cr6 at 62-63 hrc
Cladding: Mild Steel
Thickness 2.6>1.9mm
Weight 261 grams
Handle is beautiful single piece of Rowan Wood
$350 Conus
Sold! Marko Tsourkan 180mm gyuto in A2 - $340 Conus
Love everything about this knife - profile, grind, steel (great edge retention yet easy to sharpen, not too reactive). The choil shot tells a lot. A previous owner lost ~2mm at the tip. but ground it at the spine to fix it. Besides that, only stropped on Jnats. Used it mostly on fruit and a few onions.
Not the best pictures (bought on bst) SOLD - Tsourkan & M. Hinoura
154g
174mm edge length
44mm heel height
Bloodroot Nakiri
Just purchased this knife as a combo bundle.It was used just once by previous owner to cut a lime. It is otherwise like new with a very small mark from the cut.
Price $500 Conus open to offers
Specs:
170X49MM
175 g
Sawblade @64 Hrc
Handle Copper Beech and Blackwood
Andrei Gyuto sold!
Used been on my knife rack the last few months. What a performer!
223X59mm
WX-15 steel it is his 52100 equivalent
White Acacia Handle
207g
Asking $280 Conus
Tim Johnson
Oxford, MA
Asking $200.00 CONUS
Used has been on my rack but well cared for. Never sharpened, sharp but could be brought back to razor sharp when it arrived.
This is a one and done petty for me, these blades are ground to handle abuse. I love it!
Specs:
steel: 15n20
source: reclaimed bohler uddelholm bandsaw steel
Heat Treat: Jarod Todd @ RC63-64
Finish: fine scotchbrite with forced patina
165mm edge length x 37mm tall at heel
Balance point @ Ferrule
Spine and Choil chamfered
Cast aluminum honeycomb handle
Cutting Geometry: fine distal taper, convexed bevels, edge finished on shapton pro ceramics. T
Handles: hidden tang, micarta frame style. bonded with west systems g-flex.
Attachments
Last edited:
