WTS Fujii Keiichi Stainless Clad W#1 270mm Gyuto

Discussion in 'Buy/Sell/Trade (Knife Only)' started by Andreu, Feb 5, 2020.

Help Support Kitchen Knife Forums by donating:

  1. Feb 5, 2020 #1

    Andreu

    Andreu

    Andreu

    Senior Member

    Joined:
    Oct 2, 2017
    Messages:
    306
    Catch and release. For your consideration.

    Stainless clad white# 1 by Fujii Keiichi. The knife has been polished and etched. Handle is rosewood/horn. The knife has been sharpened a few times, most recently finished on an Aiiwatani tomae and stropped on roo by the previous owner.

    Knife Specs
    Edge length: 260mm
    Heel height: 49mm
    Weight: 215g
    Spine @ handle: 3.0mm
    Spine @ heel: 2.8mm
    Spine halfway: 2.2mm
    Spine 1” from tip: 1.4mm
    Balance point: about 1-1/2” from the heel (at the base of the bottom kanji character)

    $275 all inclusive in CONUS. International pays for shipping.

    Photos below are from the previous post. I obtained permission from the previous owner to use them for this purpose.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Feb 5, 2020 #2

    Corradobrit1

    Corradobrit1

    Corradobrit1

    Senior Member

    Joined:
    May 2, 2015
    Messages:
    2,115
    Cool knife. That's a tasty choil
     

Share This Page

Group Builder