• If you have bought, sold or gained information from our Classifieds, please donate to Kitchen Knife Forums and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Ikenami Hamono Deba 139mm White 1

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 29, 2018
Messages
2,029
Reaction score
4,039
$100

139mm heel to tip
202 g
46mm tall
6.5mm thick

White 1 iron clad
With Saya, but no pin and it's loose
Bought for $183+$20 from Knife Japan


Steel is pretty good and harder than some Sakai stuff. Catches on hair. Bites into skin with very hard pointy teeth, but not as sharp and crisp as my favorite white steel. Feels more wear resistant like blue steel while sharpening, but it's still white. Flattened bevel with low spot at very heel. Fit and finish are great, aside from the low spot


PXL_20220406_231540128.jpg
PXL_20220406_231547254.jpg
PXL_20220406_231607023.jpg
PXL_20220406_231617617.jpg
PXL_20220406_231631579.jpg
PXL_20220406_231642017.MP.jpg
PXL_20220406_231655579.MP.jpg
PXL_20220406_231736195.MP.jpg
PXL_20220406_231750836.MP.jpg
PXL_20220406_231852550.MP.jpg
 
Last edited:
Saya is loose . . . I usually just put a cardboard shim in there, rather than putting a proper wood shim. About 2mm height and thickness loose

Exceptionally straight for a deba . . . Of the deba I've had


PXL_20220406_231759591.jpg
PXL_20220406_231804619.jpg
PXL_20220406_231809972.jpg
PXL_20220406_231807753.jpg


Straightness of edge
PXL_20220406_232411861.MP.jpg


Viewed at angles
PXL_20220406_232417961.jpg
PXL_20220406_232419517.MP.jpg
PXL_20220406_232422444.MP.jpg


PXL_20220406_232423867.jpg


Cladding line and fingerprint oil . .
PXL_20220406_232719954.MP.jpg
 
Last edited:
Back
Top