Just a few good friends of tchan001
- Thread starter tchan001
- Start date
Help Support Kitchen Knife Forums:
- Joined
- Mar 2, 2011
- Messages
- 2,377
- Reaction score
- 352
Well, that's one hell of a collection. You've got great taste!
Now we wait for what is to come in 2021
Steel by Lundbergs 282mm x 58mm uddeholm 26c3 with desert ironwood handle with buffalo horn ferrule and tin spacers.
HRC 63-64
Flat grind with slight convex edge.
Thickness:
at handle 4mm
middle of blade 2.5mm
1 cm from tip 0.4mm
248 grams
balance point in front of maker's mark.
This has to be one of the best bargains I've picked up in a long time. Steel by Lundbergs is a very reasonably priced Swedish maker and the knife was offered at a discount because it had some hamon like spots on the mono steel blade as well as some roughness to the horn ferrule. I think it adds character. To top it off, the handle is made with desert ironwood which is one of my favorite wood.
Definitely another Swedish maker to keep your eyes on.
HRC 63-64
Flat grind with slight convex edge.
Thickness:
at handle 4mm
middle of blade 2.5mm
1 cm from tip 0.4mm
248 grams
balance point in front of maker's mark.
This has to be one of the best bargains I've picked up in a long time. Steel by Lundbergs is a very reasonably priced Swedish maker and the knife was offered at a discount because it had some hamon like spots on the mono steel blade as well as some roughness to the horn ferrule. I think it adds character. To top it off, the handle is made with desert ironwood which is one of my favorite wood.
Definitely another Swedish maker to keep your eyes on.
What a way to start the néw year - it’s an incredibly beautiful knife - and a great deal in pricing on top
The fit, finish, and handle all looks amazing
Would love to hear more
The fit, finish, and handle all looks amazing
Would love to hear more
Kagekiyo 240mm blue 1 damascus wide bevel gyuto with octagonal ebony handle with brass ferrule and endcap
Hrc: 64+
Weight: 267g
Full length: 384mm
Blade length: 230mm
Height at heel: 50mm
Thickness at heel: 3.9mm
Thickness 1cm from tip: 1mm
Bought this gorgeous blade from KTH in Hong Kong. Normally people worry about the ebony handle being slippery when wet but the brass ferrule and endcap add a slight bit of roughness to prevent that. Top notch fit and finish. Great knife and free local shipping for me. What more could I ask for?
Hrc: 64+
Weight: 267g
Full length: 384mm
Blade length: 230mm
Height at heel: 50mm
Thickness at heel: 3.9mm
Thickness 1cm from tip: 1mm
Bought this gorgeous blade from KTH in Hong Kong. Normally people worry about the ebony handle being slippery when wet but the brass ferrule and endcap add a slight bit of roughness to prevent that. Top notch fit and finish. Great knife and free local shipping for me. What more could I ask for?
Last edited:
o_in_nyc
Supporting Member
really NICE!
The Artificery 213mm x 54 mm woodgrain pattern stainless CPM154/AEB-L Damascus integral gyuto with amboyna burl handle. 200g weight
Made by William Brigham with his own stainless Damascus made from CPM154 and AEB-L. Matched with a spectacularly colorful reddish amboyna burl handle, this is a work of kitchen knife art.
Made by William Brigham with his own stainless Damascus made from CPM154 and AEB-L. Matched with a spectacularly colorful reddish amboyna burl handle, this is a work of kitchen knife art.
Last edited:
I need more Tchan knives to look at
nakiriknaifuwaifu
Senior Member
We haven't seen anything in the 5 figures range yet.
Marius Smide 240x60mm Black Tiger Damascus integral bolster gyuto with bog oak handle and dyed birch bark spacer.
This knife has a low layer twist damascus and a forged integral bolster. Handle is made out of bog oak from a ship wreck found in Stockholm archipelago.
The steel is heat treated to 62 hrc and has a laser grind, nail flexing edge.
Length Edge: 240mm
Length overall: 370mm
Height at Heel: 60mm
Spine taper: 8mm out from bolster to very thin.
Weight: 313g
Steel: 15N20 and 15LM
Handle: Bog oak and dyed birch bark spacer
Another beautiful Swedish knife joins the collection.
This knife has a low layer twist damascus and a forged integral bolster. Handle is made out of bog oak from a ship wreck found in Stockholm archipelago.
The steel is heat treated to 62 hrc and has a laser grind, nail flexing edge.
Length Edge: 240mm
Length overall: 370mm
Height at Heel: 60mm
Spine taper: 8mm out from bolster to very thin.
Weight: 313g
Steel: 15N20 and 15LM
Handle: Bog oak and dyed birch bark spacer
DrEriksson
Supporting Member
Cool that you snagged this one. I thought it was strange that it did not get sold quicker. Looks so sweet.
This is a gorgeous knife from an amazing Swedish maker. I am hoping I can get my grubby little paws on a Marius Smide soon!
