Knives....and WIP's...

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Some pics and specs from the Nakiri
Spine 4,1-1,9mm
1cm above the edge 1,5-1,0-0,8mm
Above the edge 0,2-0,15-0,09mm
183x58x4,1mm overall
Handle is 126x28x22 (tapers to 26x17)
Weight 275g

Steel is Niolox at 61hrc
Handle is Micarta
PXL_20240511_095308066.PORTRAIT.ORIGINAL-01.jpeg
PXL_20240511_095319769.PORTRAIT-01.jpeg
PXL_20240511_095452519.PORTRAIT-01.jpeg
PXL_20240511_095502684.PORTRAIT-01.jpeg
PXL_20240511_095609965.PORTRAIT.ORIGINAL-01.jpeg
PXL_20240511_095520974.PORTRAIT.jpg
PXL_20240511_095434210.PORTRAIT.ORIGINAL.jpg
PXL_20240511_095346922.PORTRAIT.ORIGINAL.jpg
 
The Nakiri is sold but I wanted to share the specs of it.

183x58x4,15mm
Taper spine 4,15-2,8-1,9
1cm above the edge 1,5-1,0-0,75
Above the edge 0,2-0,15-0,09
Handle 126x28x22 (taper to 26,5x17)
Balance point ca 35-40mm
Weight 275g

Fabian โœŒ๏ธ
 
Started with two customs today. Fulltang petty and a 240 Gyuto. Both out of 1.2419
Will do my best to finish them till our holidays!
PXL_20240613_122648747.jpg
PXL_20240613_104550132.jpg
 

Attachments

  • PXL_20240613_104545662.jpg
    PXL_20240613_104545662.jpg
    2 MB · Views: 0
  • PXL_20240613_122640682.jpg
    PXL_20240613_122640682.jpg
    2.3 MB · Views: 0
Today was my last day in the workshop before our holidays so I had to finish the last knife. A custom Gyuto out of 1.2419 with crosscut beechwood handle and a more crazy-ish handle shape. I like it, the customer wants it so... ๐Ÿคทโ€โ™‚๏ธ๐Ÿ˜„

240x59,6(!)x3,5-2,5-0,6mm
206g
More Laser-Shop grind. 1,06mm 1cm above the edge at the heel. 0,7mm in the middle.
Balance point is about 35-40mm.

Convex geometry of course and a belt finish in 120/180 grit. Profile is more flat (no flatspot but not too curvy).

PXL_20240619_103208147.jpg


 
I've been working on a lot of re-handling projects recently...idk, but I guess 8 or 9 fresh handles or something like that... A lot of work and a whole lot of dust ๐Ÿ˜„

I wanna share some pics of my favorites. Really nice looking knives with fresh walnut Rokkaku handles. I like em ๐Ÿ‘Œ

PXL_20240717_155837888.PORTRAIT.ORIGINAL.jpg
PXL_20240717_155852583.PORTRAIT.ORIGINAL.jpg
PXL_20240717_155929415.jpg
PXL_20240717_155951441.PORTRAIT.ORIGINAL.jpg
PXL_20240717_160005592.PORTRAIT.jpg
PXL_20240717_160017708.PORTRAIT.ORIGINAL.jpg
 
Back
Top