tostadas
Hobbyist / Craftsman
Manaka Cleaver 216x109mm
Blue #2 with Iron Cladding
Custom Burnt Oak Octo Handle
Lightly used full size cleaver, home use I'd guess maybe around 5 times or so. I got this recently and swapped out the stock gyuto-sized handle for one of my custom burnt oak handles sized specifically for this knife. It's fitted up without the "neck" like a proper cleaver. Decent heft to allow for plenty of power, but not overly so considering the size of the blade. Grind is convex both sides up to the shinogi line, profile is a gentle curve with no dead spots. I smoothed out the draggy stock finish with a smoother kasumi using some finger stones. Also rounded and polished the choil for comfort. I enjoyed this one so much, I placed an order with Kisuke for a custom one in B#1 (albiet for much higher cost).
$465 $435 $415 shipped & fully insured within US (international PM for details)
Dimensions
Blade length: 216mm
Height at Heel: 109mm
Weight: 445g
Balance: 80mm forward from heel
Spine Thickness
Heel: 2.9mm
Midpoint: 2.1mm
1cm from Tip: 1.9mm
Blue #2 with Iron Cladding
Custom Burnt Oak Octo Handle
Lightly used full size cleaver, home use I'd guess maybe around 5 times or so. I got this recently and swapped out the stock gyuto-sized handle for one of my custom burnt oak handles sized specifically for this knife. It's fitted up without the "neck" like a proper cleaver. Decent heft to allow for plenty of power, but not overly so considering the size of the blade. Grind is convex both sides up to the shinogi line, profile is a gentle curve with no dead spots. I smoothed out the draggy stock finish with a smoother kasumi using some finger stones. Also rounded and polished the choil for comfort. I enjoyed this one so much, I placed an order with Kisuke for a custom one in B#1 (albiet for much higher cost).
Dimensions
Blade length: 216mm
Height at Heel: 109mm
Weight: 445g
Balance: 80mm forward from heel
Spine Thickness
Heel: 2.9mm
Midpoint: 2.1mm
1cm from Tip: 1.9mm
Last edited: