nakiriknaifuwaifu
Senior Member
So it depends on how good gifts folks send you
Hah! Thanks in advance for the cleaver
So it depends on how good gifts folks send you
So vardagspolerat!Next up handle installations
PTV-fredagSo vardagspolerat!
Next up handle installations
Next up handle installations
It depends on what was orderedhelgpolerat hƶgglansollon!
so who will get the "golden ollon edition" handle?? i bet that it will be a nice surprise
Ok we can do more videos
Or better yet, incorporate the motor into that polished custom wood?
Friday evening in europe is obvious.you mean like a concrete vibrator??
And if you get this from burnfitting, like some tar residue from smoke, that wipes off easy with alcohol. Sooner easier than later. I see some jknives sometimes with this left on the blades.
And if you get this from burnfitting, like some tar residue from smoke, that wipes off easy with alcohol. Sooner easier than later. I see some jknives sometimes with this left on the blades.
Yea i will admit that was a bit hotter than necessary, but worksThat's a hot tang! I've always been afraid to make it that hot when installing. But I've never done a real burn in, just an install where I get the handle hot enough to melt the wax or glue... Inspiring.
Hey I made my first knife about six years ago but thanks, good to hear it might help.Thank you Robin, that was really informative and fun to watch. Iāve been using 30 minute slow set epoxy resin. I use the same procedure, without the torch of course. Iām going to give the hot glue a try. You donāt have to hold onto the knife for as long to wait for it to set and you can remove the handle if you ever need to. I enjoy watching a veteran like you doing your craft.
Hey I made my first knife about six years ago but thanks, good to hear it might help.
Hey I made my first knife about six years ago but thanks, good to hear it might help.
I worked in a industry with quality control, checking practical function and tolerances to standards, for parts we built battery cabinets with.Please tell me you were a corporate executive before that, or a copy editor for an advertising company. Btw, I heard someone call you the grandfather of Swedish knifemakers recently. It must be a young field!
When are these shipping?