My sharpening table

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikeeyS

Member
Joined
Nov 10, 2021
Messages
13
Reaction score
6
I finally finished this table for sharpening. The construction is from 1"x 5" solid bamboo flooring that I salvaged years ago. I ripped the flooring to 2 3/4 wide strips for the frame. I used biscuits and glue to make the legs and the top was made from 5.5 inch flooring using biscuits. I used 3/8" round over for the table frame stiles. I then used a 3/4" cove bit to make the blocks to secure the table top to the frame. The whole table is very solid which I added lockable casters from amazon. The Bamboo flooring is solid through out and will burn drill bits easily. The attached pics show my sander that I mounted so the belt rotated away from me and have since changed the setup with the sander as designed upright. Over al the setup works great but the paper wheels will be an option.
 

Attachments

  • 20220111_133739_Burst06.jpg
    20220111_133739_Burst06.jpg
    160.5 KB · Views: 66
  • 20220105_125632_Burst01.jpg
    20220105_125632_Burst01.jpg
    105.5 KB · Views: 61
  • 20220105_151530.jpg
    20220105_151530.jpg
    81 KB · Views: 44
Back
Top