SOLD Price drop - 185mm x 53mm nakiri

[Knot Handcrafted]

Hi guys,

Unexpectedly this one is available.
185mm x 53mm nakiri in Silver Fox 100 stainless steel. Hardness 61HRC. Rounded and polished spine & choil. The handle is made from tamboti wood and blackwood. Convex bevels sanded to 600 grit.

Overall length - 331mm
Spine - 2.4mm to 1.5mm
Edge - (midway) 0.97mm at 10mm, 0.4mm at 5mm, 0.1mm at 1mm
Handle length - 130mm ( 20 x 24.5mm front, 21 x 26.5mm back)
Balance point - at the makers mark

Asking £235 (circa 295 USD) including shipping to US/ Europe and PayPal fees.

If you have any questions, let me know.

Many thanks

Michael

 

[HumbleHomeCook]

Gorgeous!

 

[Knot Handcrafted]

Thanks Erik

 

[Hassanbensober]

Highly recommend Michael’s knives. Work is top notch

 

[Knot Handcrafted]

Thank you, it is much appreciated

 

[jaydee]

Although having almost the same knife from you this still makes me itch.
Next year i will try one of your stainless knives. I wonder what you would recommend SF100 vs AEB-L. Do you still work with both?

Very nice handle by the way. Refreshing to see a short ferrule executed well.

 

[Knot Handcrafted]

Thank you, I work with both Aeb-l and SF100, there is a very little difference between these, perhaps SF100 is more scratch resistant.

 

[Knot Handcrafted]

Bump

 

[Delat]

Although having almost the same knife from you this still makes me itch.
Next year i will try one of your stainless knives. I wonder what you would recommend SF100 vs AEB-L. Do you still work with both?

I have one knife in each and can’t say I notice much of a difference, although they’re from different makers. They’re both great steels with solid edge retention and easy to sharpen; I haven’t noticed any micro chips on either but they’ve only had fairly light use and not needed a 2nd sharpening yet.

My understanding is that SF100 and AEB-L are basically equivalents with SF100 manufactured in the UK so it’s more readily available to makers there.

Anyway, love the specs and price on the nakiri - GLWS!

 

[Knot Handcrafted]

Yes, the composition of both steels are almost identical. Performance wise, it is very difficult to distinguish between them. The edge retention is again very similar. Both are tough, you shouldn't have any issues with chipping. Thanks

 

[simona]

Hi guys,

Unexpectedly this one is available.
185mm x 53mm nakiri in Silver Fox 100 stainless steel. Hardness 61HRC. Rounded and polished spine & choil. The handle is made from tamboti wood and blackwood. Convex bevels sanded to 600 grit.

Overall length - 331mm
Spine - 2.4mm to 1.5mm
Edge - (midway) 0.97mm at 10mm, 0.4mm at 5mm, 0.1mm at 1mm
Handle length - 130mm ( 20 x 24.5mm front, 21 x 26.5mm back)
Balance point - at the makers mark

Asking £235 (circa 295 USD) including shipping to US/ Europe and PayPal fees.

If you have any questions, let me know.

Many thanks

Michael

View attachment 283913View attachment 283914View attachment 283915View attachment 283916View attachment 283917View attachment 283918View attachment 283919View attachment 283920

You made that? It's sleek! Good job!

 

[Knot Handcrafted]

Thanks!

 

[Knot Handcrafted]

Price drop - £215 (270USD)

 

[Knot Handcrafted]

Bump

 

[Knot Handcrafted]

Sold, thank you