RoanRoks29
Well-Known Member
- Joined
- Sep 13, 2012
- Messages
- 74
- Reaction score
- 1
I wanted to get some practice in with wood working, so I decided I would try to make a saya. So I started making one for my 8" shun.
Traced it out , then cut it
Then retraced it to see where I need to carve out to fit the knife!Hours of work later, I lined it with some smooth maroon felt then glued it together sanded it down and cleaned her up a bit .
So after making that one I had some small peices left over and figured my little petty need one too. This time I changed the design a bit an add in two little notches in order to make it easier to pull off. The two sayas with the felt fit like gloves and I orginally planned on putting in pins but they were unnecessary.
Traced it out , then cut it
Then retraced it to see where I need to carve out to fit the knife!Hours of work later, I lined it with some smooth maroon felt then glued it together sanded it down and cleaned her up a bit .