- Joined
- Feb 28, 2011
- Messages
- 6,006
- Reaction score
- 213
Purchased new from the maker, and has seen light use in a home kitchen. Blade has developed a slight natural patina.
These are Luke Snyder's notes about the knife:
Some measurements:
Weight: 127 g.
OAL: 257 mm
Edge length: 130 mm
Height at heel: 34 mm
Spine above heel: 2.9 mm
Spine halfway between heel and tip: 1.9 mm
Spine approximately 1 cm from tip: 0.6 mm
$300 includes US Shipping and PayPal fees.
These are Luke Snyder's notes about the knife:
Blade: Car coil spring at HRC 60.5, flat/slight convex grind, distal taper. A very comfortable knife in the hand with good cutting efficiency and a very tough steel that gets VERY sharp.
Handle: African blackwood, spalted Pau Rosa, recycled brass. Through-tang construction is very strong without being heavy.
A great multi-purpose petty that's comfortable and durable.
Handle: African blackwood, spalted Pau Rosa, recycled brass. Through-tang construction is very strong without being heavy.
A great multi-purpose petty that's comfortable and durable.
Some measurements:
Weight: 127 g.
OAL: 257 mm
Edge length: 130 mm
Height at heel: 34 mm
Spine above heel: 2.9 mm
Spine halfway between heel and tip: 1.9 mm
Spine approximately 1 cm from tip: 0.6 mm
$300 includes US Shipping and PayPal fees.