Search results

Got a suspicious message. 5 minutes later, another near identical. Turns out he is a known quantity by googling. I reported but I thought I’d warn. https://www.hkpro.com/threads/2024-scammer-alert.573163/

I’m also down to trade my 180 for it potentially

Ideally stainless clad blue 2, but white 2 is okay too

I won his drawing and the new one has better specs for me so letting this one go. It’s factory edge with some patina. Pretty light usage. Trade value is 1100. Specs here: https://carbonknifeco.com/products/yanick-puig-bocote-vintage-iron-gyuto-220mm My ideal trade goal is probably the right...

Dunno about the name. Details here are that these are white alumina (is this AlOx or something else?) and they come with a nice looking kind of storage case thing. They demonstrate it on R2 and mention cutting hard steel fast, so maybe targeted at more wear resistant PM steels. Apparently they...

Floating this one for trade. Honestly I don’t love the handle so would be willling to trade for a different JB as well. 240g 135cr3 under wrought, “semi integral” like 230x52ish? Trade value like 550 USD? Sale price 475 USD

Kipp workpony 230x52 199g 500 shipped This came to me with an (IMo) ugly forced patina and some scratches from sharpening. I sanded it with 2000 grit sandpaper to remove it, but it’s still a little rough finish wise. Takamura Hana Suji 169g 240x37 600 shipped? Still has OOTB edge, still sharp...

Let’s say 600 shipped Completely unused (as BNIB should mean). I’m not a BNIB guy but I impulse bought this and need to make room for another less impulsive buy. More pics and specs available later (I’m out of town). But thought I’d put this out there to intercept anyone who might try to buy...

Either 240mm or 240-270 suji. Plus cash where appropriate. Hana has original edge, very good condition, has kanji of Japanese vendor.

Takamura SG2 Petty (black handle with saya) Length/height/width: 150 29.3 1.3 72g Note: this is from a Japanese vendor, so the kanji is their store kanji, and the handle is black. It is not a typo that this is SG2 despite having a black handle. It seems this store has a lineup where the bigger...

Y. Tanaka AS (Yoshihiro) (with saya) Length/height/thickness: 227 50.2 2.3 152g Notes: This one is thinned, repolished to 2000 grit sandpaper, and given a full kasumi with natural stone dust. The kanji was lost on the right side getting out deep grind marks from the factory. Notes: Handle is a...

Isasmedjan Wrought Iron Clad Apex Ultra (MCX) (MCX | Gyuto 240mm Wrought Iron Clad Apex Ultra | Modern Cooking) Length/height/thickness at heel: 244 53.6 2.6 187g $500 450 shipped Catcheside Forged Geometry (C105 steel) Length/height/thickness: 250 54.2 5.4 (heel)-3.5 (right after heel) 200g...

Want to give this another try in a less reactive flavor. I'll buy one new from Watanabe or JNS if nothing pops up here but figured I'd throw this out if anyone is looking to move one of these

Used just a few times but don't use it much since it doesn't fit in my dishwasher.. Surface is a little less shiny because I used the Hasegawa cutting board surfacer (basically like sandpaper) to give the board more grippiness (which it severely lacks without). Asking 100 shipped

Toyama Damascus Gyuto 240 x 54 266g Blue 2 steel Used this a few times. Note a few things: - I've refinished this with sandpaper to a near mirror and brought back some contrast with stone dust. It was a very subtle damascus look. I also thinned the cladding at the tip, and rounded the choil for...

Catcheside Gyuto (C105 Steel) Spine at heel, mid: 5.0 2.0 200g 250x53.5 Balance at A Price: 700 Notes: it is not a lefty grind, there is just a slight overgrind on the heel on one side that makes it look lefty biased. If you look at the primary bevel, you'll see it's only the case near the heel...

If anyone has got it lying around…

Kato KU Blue 2 - $1450 232 x 49 233g 5.5 2.6 Balance at last kanji. Used only for a few test cuts, so some mild patina Pics here: Withdrawn - Kato KU 240, Catcheside 250, Isasmedjan Honyaki 250 Catcheside Gyuto (C105 steel) - $700 (dropped) 250 x 53 199g Spine (heel mid) 5.0 2.0 Balance on the...

Posting these slightly too big/heavy for me up for trade first. Looking for Milan, Bazes, the.nine, Yanick, Shihan, Markin, maybe Xerxes Primus I/II Catcheside Gyuto (C105 steel I believe) 250 x 53 199g Spine (heel mid) 5.0 2.0 Balance on the "A" Value estimate: 750 Kato KU 232 x 49 233g 5.5...

All prices include fees and CONUS shipping TF Denka Wa-Gyuto with District Cutlery regrind - $550 212x50 174g Spine (heel, mid) 3.7 2.5 Balance between 3rd and 4th Kanji Sakai Kikumori Yugiri Kiritsuke Gyuto (stainless clad B#1 by Y Tanaka and Myojin) - $400 215 x 55 217g Spine (heel, mid) 3.3...