TF Chronicles

Find deals on amazon
Shop Knives and stones on ebay
Miura knives
Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
panda said:
I would like to just announce how much I f7cking love my morihei hisamoto right now.. end game knife has been found. šŸ˜Ž
Click to expand...

I'm not a pro but in a similar boat with my 300 from Tsubaya. The steel is unreal too. Unlike yours I love it because it's such a beefcake. Still very thin behind the edge but it's 430g so it thickens up quickly. Nothing about it makes sense but it just works for me. I'm so close to buying the 270 morihei on hitohira but am concerned it won't have the same magic as this one. I previously had a 210 morihei and it was good, but not on the same level as this one.
 
labor of love said:
Ok that sounded a bit harsh šŸ¤£
Click to expand...
IMG_2437.jpeg

He didnā€™t think it was too harsh, nor was it a joke.
 
labor of love said:
Canā€™t take any of you folks that only own one TF seriously.
Give me dedication or GTFO
Click to expand...

Yes, I realize this is (mostly) a joke, but...
I got my first TF (210 Denka gyuto with a Joe Bone ironwood wa handle) a couple of months ago from BST and I'm loving it.
So now I'm wondering what's the sweet spot for a second Denka.

A 150 mm petty?
A 150 mm gyuto?
A 165 mm nakiri?
Something else?

I'm asking more from the "What does Fujiwara do best?" perspective, rather than the "What else do I need in my knife drawer?" POV
(which is, realistically, probably nothing.)
I'm thinking that it might be fun to order directly from TF, but that raises the question of specs/special requests or lack thereof.

TIA
 
Last edited:
Avincent52 said:
Yes, I realize this is (mostly) a joke, but...
I got my first TF (210 Denka gyuto with a Joe Bone ironwood wa handle) a couple of months ago from BST and I'm loving it.
So now I'm wondering what's the sweet spot for a second Denka.

A 150 mm petty?
A 150 mm gyuto?
A 165 mm nakiri?
Something else?

I'm asking more from the "What does Fujiwara do best?" perspective, rather than the "What else do I need in my knife drawer?" POV
(which is, realistically, probably nothing.)
I'm thinking that it might be fun to order directly from TF, but that raises the question of specs/special requests or lack thereof.

TIA
Click to expand...
The only 3 TFs Iā€™ve used out of 10 at this point that were kinda meh would be 150 petty, 240mm denka gyuto and 240mm Mab wa gyuto.
Petty is ok nothing remarkable has a sorta gyuto profile which Iā€™m trying to sharpen out over time.
Denka gyuto was too curvy. After studying hundreds of TF profiles I think the taller you request a blade to be the curvier it becomes, they donā€™t seem to lower the tip any. Sweet spot IMO is 50-52mm.
Mab Wa gyuto just had inconsistent grind that at the time I was too lazy to deal with so I got rid of it.
I think the 180mm and 195 gyutos looks consistently good if that size is your thing.
Never ordered direct but perhaps Iā€™ll try. Isamitsu will do AS soft iron clad western for a bit less than a Denka so thatā€™s where my hearts at.
My fave TF cutters so far are 210mm denka and 240 Hisamoto.
 
Avincent52 said:
Yes, I realize this is (mostly) a joke, but...
I got my first TF (210 Denka gyuto with a Joe Bone ironwood wa handle) a couple of months ago from BST and I'm loving it.
So now I'm wondering what's the sweet spot for a second Denka.

A 150 mm petty?
A 150 mm gyuto?
A 165 mm nakiri?
Something else?

I'm asking more from the "What does Fujiwara do best?" perspective, rather than the "What else do I need in my knife drawer?" POV
(which is, realistically, probably nothing.)
I'm thinking that it might be fun to order directly from TF, but that raises the question of specs/special requests or lack thereof.

TIA
Click to expand...
Denka petty is a waste of superb HT and grind. I'd go for a nakiri. The weight forward feel of their nakiri is a perfect profile for a Denka. Whatever you get make sure its THIN BTE not thicc.
 
labor of love said:
Never ordered direct but perhaps Iā€™ll try. Isamitsu will do AS soft iron clad western for a bit less than a Denka so thatā€™s where my hearts at.
My fave TF cutters so far are 210mm denka and 240 Hisamoto.
Click to expand...
Another user who's seen the light. Love my 210 Denka and Hisamotos. The oversized 240 was just too long in my hands.
 
JASinIL2006 said:
Iā€™d consider - not a Denka - but a 180 TF Mab. You might find it interestingā€¦
Click to expand...
I have a 195 Maboroshi (actual edge length is ~204mm). It's the knife I go for unless I need something else specific - i.e. honesuki, nakiri, sujihiki.
 
parbaked said:
Look who I bumped into today at the SF Civic Center farmerā€™s market:
View attachment 311218
#theotherTFTFTFTFTFTFTFTFTF
Click to expand...

Small world. I used to work with Tyler's brother who also wrote for Tennis Magazine back in the day.
No, the connection never resulted in any good meals.
Strangely, another Tennis friend, the great food writer Andrew Friedman, has become my fine dining mentor.
You should totally read Chefs, Drugs, and Rock & Roll and The Dish.

And especially Knives at Dawn, his gem of a book about the Bocuse D'Or competition.
 
Last edited:
Never really been into polishing on a serious level but this Hisamoto I got maybe 2 months came with quite a sweet finish so Iā€™d be remiss if I didnā€™t try to keep maintaining it on my own from time to time. Not sure if all Hisamotos are this stone ready but this one is crazy easy to polish up.
 

Attachments

  • IMG_8957.mov
    46.8 MB
Last edited:
labor of love said:
Never really been into polishing on a serious level but this Hisamoto I got maybe 2 months came with quite a sweet finish so Iā€™d be remiss if I didnā€™t try to keep maintaining it on my own from time to time. Not sure if all Hisamotos are this stone ready but this one is crazy easy to polish up.
Click to expand...
Takes a wonderful blue patina too especially after a fresh Jnat kasumi polish.
 
I read that someone asked TF for a handle sticker and it was a hard no. I'm refurbishing an old Mab gyuto and would like to replace sticker if possible. I hate "tags" on things, but the TF handle one just seems proper. Any ideas or thoughts?

Side note, does anyone know what that sticker says?
 
Johnsmyname said:
I read that someone asked TF for a handle sticker and it was a hard no. I'm refurbishing an old Mab gyuto and would like to replace sticker if possible. I hate "tags" on things, but the TF handle one just seems proper. Any ideas or thoughts?

Side note, does anyone know what that sticker says?
Click to expand...
ā€œWarranty void if removedā€




(Itā€™s ā€œfire forgedā€)
 
I do marketing for a living. I could have some exact replicas made. Might be expensive for a single. Anyone interested if I made more??

ETA: Perhaps Iā€™ve had too many drinks tonight and over thinking this.
 
Last edited:
You must log in or register to reply here.

Latest posts

Back
Top