WillC
Senior Member
- Joined
- Jul 9, 2011
- Messages
- 2,142
- Reaction score
- 2
Following on from this thread, http://www.kitchenknifeforums.com/showthread.php?3095-Just-out-of-the-etch.
I've had the blade and handle finished for a while for this. But I've been tinkering with the profile as it needed to be rubbed down again to etch my Logo. Its finally finished and I have tried to keep in mind the feedback from my pass around. I have gone for a for a very light etch this time and a fairly high hand rubbed satin finish. I'm going for subtlety, while the pattern is not obvious all the time, it blings when it catches the light. I'll add some specs and specific changes I've made from the pass around.
In the mean time, plenty of pics
I've had the blade and handle finished for a while for this. But I've been tinkering with the profile as it needed to be rubbed down again to etch my Logo. Its finally finished and I have tried to keep in mind the feedback from my pass around. I have gone for a for a very light etch this time and a fairly high hand rubbed satin finish. I'm going for subtlety, while the pattern is not obvious all the time, it blings when it catches the light. I'll add some specs and specific changes I've made from the pass around.
In the mean time, plenty of pics