Cardboard?
I made this to take to a blade show but I still use it.
I made this to take to a blade show but I still use it.
Looks like you should add knife racks to your list of products for sale.It was a busy day, but I did find some time to make progress on the new rack wall. The magnets arrived so I got those into the boards with epoxy right away. I thought I calculated the length of the slots to fit the magnets perfectly, but I forgot to account for the obvious round cutter in the router. So I had to hand chisel the corners for the magnets to fit in the slots. The racks were then placed on my jointer so that the magnets pull themselves all the way into the groove as the epoxy dries.
While that was drying I moved inside and started mounting the shelves and japanese rack. The shelves are hilariously strong which makes me happy. The japanese racks aren't perfect though. Each piece is mounted to the wall with seven drywall screws which is ridiculously overkill, so that's good. but I immediately found the magnetic pull wasn't enough. If you saw in a previous post, each knife got one magnet in a metal cup to hold it in place. I thought this would be plenty and its not the case. I pulled it off and added three more magnets to each for a total of four with a metal spacer and now it is WAY better.
In addition, the pegs aren't solid enough for me. They almost don't even serve a purpose because there is now so much magnetic pull that on the left side they are pulled in by the magnet harder than gravity pulls them down onto the peg. However on the right side where the handles are and therefore no magnets, some of the pegs angle down ever so slightly when the knife is resting on that, which I don't love. Again nothing is falling and it is totally fine, but I want it to be better. Even though I want the pegs to be removeable to I can access the screws, I think I will put a little bit of CA glue in there to hold the pegs where I want. Enough to hold the knife, but not so much that I can't grab the peg with pliers and break the adhesive connection to pull them out. Sorry if that doesn't make any sense, basically CA glue has terrible shear strength so I'm gonna use that to my advantage. ANYWAYS! Here's some pics of the process.
View attachment 307972View attachment 307971View attachment 307973View attachment 307974View attachment 307975View attachment 307976View attachment 307978View attachment 307979View attachment 307980
Hahaha, I think I’m gonna stick to boards for now These may look good, but the quality compared to my cutting boards is just nowhere near. I’d feel bad sending anybody these, or I’d spend way too long trying to get them perfect.Looks like you should add knife racks to your list of products for sale.
I have a bunch of walnut I need to use so I am tempted to make something similar but a countertop version since I don’t have any walls to drill into.Hahaha, I think I’m gonna stick to boards for now These may look good, but the quality compared to my cutting boards is just nowhere near. I’d feel bad sending anybody these, or I’d spend way too long trying to get them perfect.
It’s a very fun project, I highly recommend it. And a counter top version could be at an angle, so you probably wouldn’t even need magnets.I have a bunch of walnut I need to use so I am tempted to make something similar but a countertop version since I don’t have any walls to drill into.
Thank you! I’m extremely happy with it. And my wife doesn’t mind it, so that’s the real win here.its beautiful
Amazing set up. Oh and Luke, if you ever get scared of stabbing the celing with that Yanick sakimaru, let me know. I'll be the good samaritan and take it of your hands to ease your mind.The finale! Took a while for the epoxy to dry, but I went out this morning and everything was good to go. I put a couple coats of lacquer on and some double sided tape to the leather which I am reusing from my old racks. I used to use spray adhesive for these, but I wanted to mount the wood to the walls using screws that go right through, as opposed to a hanger hardware on the back, so I needed a way to mount the leather while the wood was on the wall. To elaborate on this, usually magnetic knife racks use what are called key hole hangers, and I don't love these, but they're necessary for when the rack is going to a customer who possibly has very limited equipment. For me though, I have the luxury of all the tools, so I put the wood on the wall and drilled straight through into the studs. Then I applied the leather and I am so happy with this system. Rock solid racks you could hang off of now.
I now have my western knives on the left, shelves in the middle for stones, powder, cloth and oil and such, and my japanese knives on the right. This is definitely the system I've been dreaming of for a long time. Very happy to see it finally come to fruition. If you have any questions please let me know. I've done my best to document the process and decisions for anybody who wants to attempt it on their own. And I am happy to help in any way I can. My main advice would be to:
Really plan for what you want it to be able to hold so you don't need to change it all in a month or two
Use four times the magnets you think you need
Bar magnets are WAY better than disc magnets
If they are somewhere that people will walk, put them above shoulder height
If you can, screw right through the whole thing into studs to make it super solid
Hopefully this has been interesting for somebody, and you stay classy San Diego
View attachment 308469View attachment 308470View attachment 308473View attachment 308474View attachment 308475View attachment 308476View attachment 308477
Oh thank you! I always wonder how I’ll dispose of my Yanick’s one day. Glad I have you looking out for meAmazing set up. Oh and Luke, if you ever get scared of stabbing the celing with that Yanick sakimaru, let me know. I'll be the good samaritan and take it of your hands to ease your mind.
The leather is awesome!!The finale! Took a while for the epoxy to dry, but I went out this morning and everything was good to go. I put a couple coats of lacquer on and some double sided tape to the leather which I am reusing from my old racks. I used to use spray adhesive for these, but I wanted to mount the wood to the walls using screws that go right through, as opposed to a hanger hardware on the back, so I needed a way to mount the leather while the wood was on the wall. To elaborate on this, usually magnetic knife racks use what are called key hole hangers, and I don't love these, but they're necessary for when the rack is going to a customer who possibly has very limited equipment. For me though, I have the luxury of all the tools, so I put the wood on the wall and drilled straight through into the studs. Then I applied the leather and I am so happy with this system. Rock solid racks you could hang off of now.
I now have my western knives on the left, shelves in the middle for stones, powder, cloth and oil and such, and my japanese knives on the right. This is definitely the system I've been dreaming of for a long time. Very happy to see it finally come to fruition. If you have any questions please let me know. I've done my best to document the process and decisions for anybody who wants to attempt it on their own. And I am happy to help in any way I can. My main advice would be to:
Really plan for what you want it to be able to hold so you don't need to change it all in a month or two
Use four times the magnets you think you need
Bar magnets are WAY better than disc magnets
If they are somewhere that people will walk, put them above shoulder height
If you can, screw right through the whole thing into studs to make it super solid
Hopefully this has been interesting for somebody, and you stay classy San Diego
View attachment 308469View attachment 308470View attachment 308473View attachment 308474View attachment 308475View attachment 308476View attachment 308477
Thank you, It was made by Imperial Custom Works down in Texas for me! I am definitely not talented enough to make something like thatThe leather is awesome!!
Nice. Looks like you need to buy about 6 more knives to fill it up. What a great excuse to buy more knives!
Nice. Looks like you need to buy about 6 more knives to fill it up. What a great excuse to buy more knives!
Enter your email address to join: