Search results

My standard Petty Chef Design. This one is made in “tougher than nails” 15N20 lumber saw blade steel. I sourced this material through Jarod Todd. He did the the heat treat on this as well. He has dialed in the treatment and shown some very good results. This steel is punching out of it’s...

Hello, so this blade pattern was originally a custom. We designed it for breaking down large amounts of boneless chicken. It is a rapala filet edge shape but with much wider heel. Turns out the blade is exceedingly good at processing lots of stuff like filet and portioning. Its murderous on...

8-5/8" LENGTH BY 2-5/16" TALL CHEF KNIFE Baker Forge “TigerMai” steel. 80crv2 core w/ bronze and copper pattern welded cladding. Fat Carbon Handle material with cedar burl accent and Rubberized Carbon Fiber Ferrule. Titanium corby bolt construction with Black Micarta Frame. Sealed with West...

10" LENGTH BY 2" TALL Chef Knife Modeled after the famed “Masamoto KS” this knife is faithful to the originals grind geometry. The KS was I believe modeled after the French Sabatier. Solid XHP Steel for a modern high performance experience. Rubberized Carbon Fiber grips with G10 frame and...

Ill be there until 6pm on friday and saturday . If you are in the area stop and say hello!

Hello, As always these knives are made by me in Oxford MA. Steel is S35VN 1/8" stock. Full distal taper on these-balance point firmly in your hand. These blades were hardened to RC60-61 and given a cryo treatment. I have a few out in the field for some years now with great feedback...

SPEC: 1084 STEEL knife 1: CAST CTEK w/ orange g10 liners knife 2: cocobolo Both knives have 304 stainless corby bolts and micarta lanyard tubes with West Systems G Flex epoxy. The tangs are tapered. Thumb ramp is chamfered and the spine is left w/ sharp corners. Bevels are ground flat and then...

Hey, Is anyone planning to attend this show? Ill be at table 9K

MAybe you did not get what you wanted for christmas, well.... time to treat yourself. Full size chef. 8"+ length and about 2" height at heel, a little less than an 1/8" at the thickest. Japanese vtoku2 core, stainless cladding steel. This is the stuff that blade gallery carries from...

Hi , So Greg Cimms posted in instagram recently. Seems he is offering a class so I am jumping at the chance. Truly one of the most awe inspiring pattern welded steel smiths out there. Trying something out here: Crowdfunding a class for my personal knife making development and giving...

Hello, I have gotten this one ready for service. This is a full size all-around chef knife. The bevel geometry is designed to perform majority of food prep tasks. The spine thickness at heel allows for a "workhorse" like heft to it. The convexed bevels minimize food sticking while still...

Very fine blade here. 11" (280mm) of silky smooth slicing action. .110" Stock Thickness. AEBL Steel @ RC62 Nicely Buffed Stabilized Maple Burl handle by Graydon Decollibus. Reindeer antler ferrule. Asking $280 Shipped CONUS

Hello, Please take a look at my latest offerings. This is a 165mm (6.5" ) by 40mm (1.57”) blade from 1/8" thick CPM154 steel. Heat Treated By Jarod Todd. RC 62 + Cryo. Very fine edge, superior edge holding over AEBL. Solid one pc Curly Walnut “WA” Handles made and installed by Graydon...

Mark @ CKTG offered some white#1 core forged out blanks awhile back from a smith over in Japan. I picked up a couple to check them out. I ended up grinding nearly all the forged finish off and changed the shape too. I sent to JT for heat treat. I went a little wild on the handle material...

Hello, This laser has turned out very nicely. 26C3 Carbon Steel, It is ground thin with a wicked distal taper and fullers (both sides of blade). The handle was made by Graydon Decollibus. I collaborate with him as often as possible, he does fantastic work. Forced Patina has been applied to the...

Hello, Please take a look at my latest offerings. This is a 165mm (6.5" ) by 40mm (1.57”) blade from 1/8" thick CPM154CM steel. Heat Treated By Jarod Todd. RC 62 + Cryo. Very fine edge, superior edge holding over AEBL. Solid one pc Curly Walnut “WA” Handles made and installed by Graydon...

Hello, Please take a look at my latest offering. This is a 165mm (6.5" ) blade from 1/8" thick AEBL steel. Solid one pc Curly Walnut handle with a carbon fiber/copper ferrule. After grinding with only a flat platen for the last 8 years I finally got myself some wheels. The blade has 6"...

Hi, Please view my 6.5" AEBL PEtty. This is the Petty design I have become famous for. Just kidding, im not famous but Iv'e sold quite a few of these. Pricing is $300 shipped CONUS. Additional details: http://timothyjohnsonknives.com/currently-available/ivdw459hs0vh5hhdc11w8mhpz69h84...

The NCCA is hosting one of several annual shows they do @ the holiday inn in Marlborough, Massachusetts . I will be there along with some friends. Please come by and check us out. Sept. 19th

Specs: Random Damascus Pattern with 15n20 and 26C3 carbon steels. This was a billet I purchased, made by Salem Straub. The blade profile is my take on the classic Sabateir. I've done a few Masamoto KS style blades a well, the two profiles are pretty similar. This one is somewhere between...