SOLD Hyde Rectangle

[BillHanna]

Open to trades as well, but 0.00USD going out. Retail was 450USD; after refurbishing and the handle needing some sanding, I’ll place the value at 300USD. love you

Rectangle Trade Targets

Lars Kallgren
Moritaka
Something from KnifeJapan
That lil Joel that just sold recently
Knot Handcrafted
Stainful Sugimoto

Also acceptable
Spåre Breadsword
Blackland Brassbird OC AND Lite plates + 120USD

One of the above knives plus 20USD makes a deal I won’t refuse.

 

[deltaplex]

This baddie is as thin behind the edge at 10mm above as most of the knives around here are at 5mm above; I hope it finds a loving home!

Dimensions: 240x120mm, 352g
Tip rise from flat: 5mm
Balance: 80mm forward from choil
Spine thickness: 1.6/1.6/1.7/1.6mm (at handle, heel, mid, 1cm from tip)
Edge thickness at midpoint: 0.2/0.4/0.4/0.7mm (at 1mm/5mm/10mm/20mm behind edge)
Grind: concave to 35mm high shinogi both sides
Handle: 19.5x25mm to 20.5x27mm, oval, 107mm length
^H/T to @tostadas

 

[pavhav]

Dang it, can I hide ten without attracting suspicion?

 

[BillHanna]

This baddie is as thin behind the edge at 10mm above as most of the knives around here are at 5mm above; I hope it finds a loving home!

Dimensions: 240x120mm, 352g
Tip rise from flat: 5mm
Balance: 80mm forward from choil
Spine thickness: 1.6/1.6/1.7/1.6mm (at handle, heel, mid, 1cm from tip)
Edge thickness at midpoint: 0.2/0.4/0.4/0.7mm (at 1mm/5mm/10mm/20mm behind edge)
Grind: concave to 35mm high shinogi both sides
Handle: 19.5x25mm to 20.5x27mm, oval, 107mm length
^H/T to @tostadas

1075 is the steel

 

[fortheloveofmoar]

That is a massive rectangle

 

[service.94107]

I would not let it go, if it were a stainless equivalent.

 

[BillHanna]

Edit to add trade targets

Notice me, senpai

 

[BillHanna]

Bump to add Brassbird plates

 

[Gshep91]

This is so tempting to go with my new Hyde gyuto…

 

[BillHanna]

SPF

 

[BillHanna]

SOLD!!

 

[Gshep91]

This is so tempting to go with my new Hyde gyuto…

Couldn’t resist.