WTS MSicard Cutlery 195mm Stainless Clad Wolfram Special Gyuto

[MSicardCutlery]

I made a little bit of stainless san mai recently and this is the first of those blades. I must admit I cut it really close with the cladding on this one, but the HT is good and the edge passes a deflection test, so everything should be just fine.

• Blade: 190mmx53mm 320grit hand finished Wolfram Special (65hrc) stainless san-mai w/ nickel layer to prevent carbon migration
• Neck: 19mmx18mm
• Handle: Oil finished birdseye maple and walnut
• POB: 37mm back from the end of the handle
• Spine: 3.2mm at the neck, 2.4mm at halfway, 1.15mm 1cm from the tip
• Grind: right hand bias, heavy convex
• Weight: 151g
• Relieved choil and spine
• Edge: .15mm@1mm, .28mm@2mm, .51mm @5mm, .85mm @10mm Measured at the midpoint.

Asking $370 U.S + $25 U.S for shipping with insurance anywhere in North America. International will be in the ballpark of $50-$75 U.S depending on the area.


Thanks for looking!