- Joined
- Aug 29, 2018
- Messages
- 2,349
- Reaction score
- 5,152
$50 shipped conus
Ebony saya from the honyaki gyuto I bought and sold. Sakai 240 mm gyuto
148 g
277mm overall length
11.5mm overall width
At entrance:
52mm slot height
4.7mm width at top
2.8mm width at bottom
Notch at heel
7.5mm deep
17.5mm high
The honyaki gyuto it was fitted to -- the saya didn't slide all the way up to the handle. The saya stopped about 5-10 mm before touching the handle, so it was too tight for that knife
https://www.kitchenknifeforums.com/...yuto-ebony-handle-and-saya.55836/#post-851286
Ebony saya from the honyaki gyuto I bought and sold. Sakai 240 mm gyuto
148 g
277mm overall length
11.5mm overall width
At entrance:
52mm slot height
4.7mm width at top
2.8mm width at bottom
Notch at heel
7.5mm deep
17.5mm high
The honyaki gyuto it was fitted to -- the saya didn't slide all the way up to the handle. The saya stopped about 5-10 mm before touching the handle, so it was too tight for that knife
https://www.kitchenknifeforums.com/...yuto-ebony-handle-and-saya.55836/#post-851286
Last edited: