HHH Knives
Senior Member
Time to sell a couple of the knives that have not been seeing enough use in my kitchen. They are both great cutters and in good used condition. Its a shame for them to sit here and not get the use they both deserve..
First up is a Misono 270MM Gyuto. I dont know alot about the knife or what steel is used other then it says Swedish Steel on the blade. It does have a few pits/staines on the blade face. but nothing that is rust or will ever effect the usefulness of the cutter! On the bolster the number is 081. The handle is a dark wood. with 3 brass pins. Its been carefully sharpened a few times.
Specs. 274mm long tip to heel. Approx 55m tall at the heel. Spine is 2.4mm thick above the heel tapering to the tip.
Asking $156.00 delivered in the US and 195.00 delivered International.
Next is a CKC cleaver with a Fish Handle. Not sure about the steel/s used for this one. But I do know its a beauty and I found it a bit larger then I was able to handle in the kitchen so Its set here unused for most of the time I have owned it. I have not sharpened it only hit it on a leather strop a couple times.
I do know Fish made some amazing handles and this is no exception. I believe it to be Hawaiian Mango with buffalo furrele. And a cool Paua Shell piece on each side of the handle.
Specs are 240mm on the edge. Approx 95mm tall at the heel and goes to 98mm at midway and then back to 95mm at the front. Spine is approx 3mm thick above the heel tapering to 1mm thick at the spine near the front of the blade.
Asking $245.00 Delivered. in the USA 285.00 International.
PayPal is prefered. I will take a check or Money order if requested..
So here are some images.
Thanks
First up is a Misono 270MM Gyuto. I dont know alot about the knife or what steel is used other then it says Swedish Steel on the blade. It does have a few pits/staines on the blade face. but nothing that is rust or will ever effect the usefulness of the cutter! On the bolster the number is 081. The handle is a dark wood. with 3 brass pins. Its been carefully sharpened a few times.
Specs. 274mm long tip to heel. Approx 55m tall at the heel. Spine is 2.4mm thick above the heel tapering to the tip.
Asking $156.00 delivered in the US and 195.00 delivered International.
Next is a CKC cleaver with a Fish Handle. Not sure about the steel/s used for this one. But I do know its a beauty and I found it a bit larger then I was able to handle in the kitchen so Its set here unused for most of the time I have owned it. I have not sharpened it only hit it on a leather strop a couple times.
I do know Fish made some amazing handles and this is no exception. I believe it to be Hawaiian Mango with buffalo furrele. And a cool Paua Shell piece on each side of the handle.
Specs are 240mm on the edge. Approx 95mm tall at the heel and goes to 98mm at midway and then back to 95mm at the front. Spine is approx 3mm thick above the heel tapering to 1mm thick at the spine near the front of the blade.
Asking $245.00 Delivered. in the USA 285.00 International.
PayPal is prefered. I will take a check or Money order if requested..
So here are some images.
Thanks