I'm looking for a Konosuke Sanjo SKD 180 petty.
I've got a couple of alternatives already on their way and customs in the works, so probably not looking for anything else.
Offering the knives below for trade. The knives that don’t trade will be for sale.
Sale price includes PP G&S fees.
For buyers interested in fee-free payment methods, I’ll offer the knives at the discounted trade value shown above.
Either way, fully insured/tracked CONUS shipping is included.
I’ve shipped internationally and can cover the first $15 for international buyers; PM and we can discuss.
Mainly looking to sell, but might be interested in trading for knives listed in the spoiler below:
Sale price / Trade value: $800 / $750 SOLD
Steel: Vtoku honyaki
Edge length: 252mm
Heel height: 53mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 4.65mm / 3.56mm / 2.45mm / 0.48mm
Weight: 305g
Handle: Ringed gidgee western full tang
Purchased from Campbell who got it from Brian Weekley: WTS - Antzenberger Gyuto
More info: Instagram
Removed patina so you can see the (excellent) condition of finish in the video. Minimally sharpened by previous owner, and never by me. I used it for a couple of home meals and set it aside.
Brian's photos probably show the knife in the best light. It's hard to accurately capture the hamon or the gorgeous figuring in the gidgee handle.
Sale price / Trade value: $1150 / $1100 SOLD
Steel: 1.2519 mono
Edge length: 229mm
Heel height: 54mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 5.66mm / 3.85mm / 1.73mm / 0.32mm
Weight: 241g
Handle: Bog oak + stainless steel
Purchased from Smidderton: SOLD - Kamon Massdrop 225mm
Excellent condition, lovely patina. Lightly sharpened on 5k by previous/original owner (never thinned), unsharpened by me.
Includes saya and allen key.
Sale price / Trade value: $675 / $625 SOLD
Steel: 52100 mono kurouchi
Edge length: 247mm
Heel height: 56mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 3.5mm / 3.2mm / 2.3mm / 0.5mm
Weight: 237g
Handle: Thermory ash mono
Purchased from avk210: SOLD - Shi han 240 gyuto
Never sharpened by me. Hardly any patina when I got it from the previous/original owner – because it'd been so lightly used, I assume it wasn't sharpened by him either.
Sale price / Trade value: $300 / $275 SOLD
Steel: Stainless clad white 1
Edge length: 198mm
Heel height: 54mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 2.48mm / 2.35mm / 1.89mm / 0.65mm
Weight: 161g
Handle: Desert ironwood + red micarta western
Purchased from cmargol who got it from Greenbriel: SOLD - 198mm Funayuki
More info: 7.8″ Muteki #4651 Funayuki by Cory
Lightly used, sharpened once by previous owner, unsharpened by me. Some very slight scratches on cladding as shown in video.
Note that the (otherwise beautiful) handle has repairs on a couple of cracks. As Greenbriel (the original owner) noted, this is how it was sold when new — you can see it in Carter’s photos.
I've got a couple of alternatives already on their way and customs in the works, so probably not looking for anything else.
Offering the knives below for trade. The knives that don’t trade will be for sale.
Knife (top to bottom) | Sale Price / Trade Value | Specs | More Info |
---|---|---|---|
$1150 / $1100 SOLD | 229x54 / 194g | BST | |
$1250 / $1200 TRADED | 254x54 / 275g | BST / Xerxes | |
$675 / $625 SOLD | 247x56 / 237g | BST | |
$1100 / $1050 SOLD | 243x49 / 217g | BST | |
$800 / $725 SOLD | 252x53 / 305g | BST / IG | |
$325 / $300 SOLD | 193x53 / 148g | ||
$325 / $300 TRADED | 222x51 / 241g | BST | |
$300 / $275 SOLD | 198x54 / 161g | BST / Carter |
Sale price includes PP G&S fees.
For buyers interested in fee-free payment methods, I’ll offer the knives at the discounted trade value shown above.
Either way, fully insured/tracked CONUS shipping is included.
I’ve shipped internationally and can cover the first $15 for international buyers; PM and we can discuss.
Mainly looking to sell, but might be interested in trading for knives listed in the spoiler below:
- Gesshin Heiji 210 sujihiki in Semi-Stainless
- Migoto Ginsan 240 gyuto (or similar Nakagawa/Yamatsuka G3 240 with ~53mm heel height)
- Takeda large NAS or AS cleaver
- 240+ wrought-clad by Heldqvist, HF, JB, Merion, Radiona Breg, Lucid, Brook, Northside, etc (bonus points for AU)
- Anything Dalman in HSS1/AEB-L
- Anything Laseur in stainless
- Any non-damascus Devin (bonus points for AU or MagnaCut)
- Anything Mario or Martell or Bazes
Evan Antzenberger 250 Honyaki Gyuto
Steel: Vtoku honyaki
Edge length: 252mm
Heel height: 53mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 4.65mm / 3.56mm / 2.45mm / 0.48mm
Weight: 305g
Handle: Ringed gidgee western full tang
Purchased from Campbell who got it from Brian Weekley: WTS - Antzenberger Gyuto
More info: Instagram
Removed patina so you can see the (excellent) condition of finish in the video. Minimally sharpened by previous owner, and never by me. I used it for a couple of home meals and set it aside.
Brian's photos probably show the knife in the best light. It's hard to accurately capture the hamon or the gorgeous figuring in the gidgee handle.
Kamon Massdrop 225 Gyuto
Steel: 1.2519 mono
Edge length: 229mm
Heel height: 54mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 5.66mm / 3.85mm / 1.73mm / 0.32mm
Weight: 241g
Handle: Bog oak + stainless steel
Purchased from Smidderton: SOLD - Kamon Massdrop 225mm
Excellent condition, lovely patina. Lightly sharpened on 5k by previous/original owner (never thinned), unsharpened by me.
Includes saya and allen key.
Shi.Han 250 Gyuto
Steel: 52100 mono kurouchi
Edge length: 247mm
Heel height: 56mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 3.5mm / 3.2mm / 2.3mm / 0.5mm
Weight: 237g
Handle: Thermory ash mono
Purchased from avk210: SOLD - Shi han 240 gyuto
Never sharpened by me. Hardly any patina when I got it from the previous/original owner – because it'd been so lightly used, I assume it wasn't sharpened by him either.
Muteki 198 Funayuki (#4651 by Cory)
Steel: Stainless clad white 1
Edge length: 198mm
Heel height: 54mm
Spine thickness at handle / heel / midpoint / 1cm from tip: 2.48mm / 2.35mm / 1.89mm / 0.65mm
Weight: 161g
Handle: Desert ironwood + red micarta western
Purchased from cmargol who got it from Greenbriel: SOLD - 198mm Funayuki
More info: 7.8″ Muteki #4651 Funayuki by Cory
Lightly used, sharpened once by previous owner, unsharpened by me. Some very slight scratches on cladding as shown in video.
Note that the (otherwise beautiful) handle has repairs on a couple of cracks. As Greenbriel (the original owner) noted, this is how it was sold when new — you can see it in Carter’s photos.
Last edited: