• If you have bought, sold or gained information from our Classifieds, please donate to Kitchen Knife Forums and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WTS Old man has to move sale, part deux! Hinoura and Nigara

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 1, 2015
Messages
1,622
Reaction score
3,748
Location
West Sacto, Ca
FWIW, 240mm Yoshikane with custom handle is still available at part 1.

SOLD Next up is an unused Simon Maillet wrought iron clad 115crv3 gyuto with a bog oak western handle. The handle took some damage to the tip of the bird's beak in shipment. I had the handle repaired and it is hardly noticeable unless you know where to look for it (see photos of the butt end of the handle). If not for unexpectedly snagging a wrought iron twist gyuto shortly after this, it wouldn't be going anywhere.

245 x 53.8mm
209g
Bog oak handle
115CrV3 @ 65+ hrc with wrought iron cladding sourced from chain links in Cornwall, England

Paid about $670 with shipping, and asking $615.00 CONUS via PayPal.

1000000477.jpg
20240902_192900.jpg
20240902_192916.jpg
20240902_193002.jpg
20240902_193040.jpg
20240902_193048.jpg
20240902_192730.jpg
20240902_192749.jpg


SOLD Next, a Steel by Lundbergs forged integral gyuto
263 x 60.5mm
276g
2140 Swedish monosteel integral with western Rowan wood handle (poor lighting doesn't do the wood justice)

Asking $550.00 CONUS

9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23102-jpg.346135
9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23103.jpg
 

Attachments

  • 9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23102.jpg
    9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23102.jpg
    961.7 KB
Last edited:
9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23104.jpg
9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23101.jpg
9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23107.jpg
9daf3446-279b-485a-92ef-6b9d2e64589c-1_all_23110.jpg


Next, Niagara sg2 k-tip gyuto
227 x 52mm
191g
Sg2 @ 63hrc
I think this is new and unused, but not 100% sure. I bought it to compare to a western version with watermelon margarita swirls acrylic handle that I bought one New Year's after a "couple" dram of whisky.

Asking $240.00 CONUS

Next

20240902_200432.jpg
20240902_200437.jpg
20240902_200442.jpg
20240902_200454.jpg


Next, Mutsumi Hinoura hammered finish gyuto

243mm x 49.9mm
220g
White steel #2 @ 62hrc
Handle is stabilized maple, blackwood and box elder spacers
new and unused.
Asking $320.00 CONUS

20240902_202201.jpg
20240902_202207.jpg
 
Last edited:
1000000492.jpg
1000000491.jpg


I'm having a hard time parting with these Tetsujin, I might change my mind by morning:

Withdrawn Tetsujin Kasumi gyuto
260 x 54.4mm
276g
Blue 2 with iron cladding @ 63hrc
Ebony and horn with nickel spacer. Spacer is a bit proud, but I don't feel it in a pinch grip. New and unused with lacquer still on it.

Asking $450.00 CONUS

1000000493.jpg
1000000494.jpg
1000000496.jpg
1000000495.jpg


SOLD Next, Tetsujin Metal Flow
232 x 50.6mm
Blue #2 @ 63hrc
Ebony and horn handle
New and unused
Asking $500.00 CONUS

20240902_204426.jpg
20240902_204431.jpg
20240902_204436.jpg
20240902_204451.jpg
 
Last edited:
SOLD Adonis MK.1 gyuto
229 x 57.4mm
Laos Ebony and brass handle
1.2442 @ 65hrc
Beautiful work, but I didn't see this replacing similarly sized Eddworks knives, so it is unused. I should note, capturing a heel shot was tough given the rounding of the heel leading up to the edge.

Asking $650.00 CONUS.

1000000501.jpg
1000000502.jpg
1000000504.jpg
1000000503.jpg


Time for payroll, if I don't pass out and I can learn to let go, there may be a monster Heldqvist and an Eddworks around the bend.
 
Last edited:
I have one Lundbergs — gyuto by Ahlberg. Keeper. I like this atelier’s work.
 
****…

I’ll take the Metal Flow and probably the Maillet too pending one question about it

Sending PM

edit: Didn’t even see the SOLD post lol thank the lord
 
Last edited:
Back
Top