• If you have bought, sold or gained information from our Classifieds, please donate to Kitchen Knife Forums and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Petty out of Niolox SB1 with hornbeam and chestnut

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jaeger

Knifemaker from Germany
Joined
Nov 8, 2021
Messages
305
Reaction score
1,031
Location
Germany
Hy there,

I'm selling the Petty's I recently made, out of Niolox SB1 at 62HRC. Blade measure 143x30x2,55mm, tapers to ~0,85mm (1cm before the tip)
Handle is 125mm
Weight is 85g
Handle material is stabilized hornbeam and chestnut burl, coffin style.

Edge is sharpened up to shapton pro 8000.

Ask for 210€
Thanks for watching
PXL_20231120_150531008.PORTRAIT.ORIGINAL-01.jpeg
PXL_20231120_150559088.PORTRAIT.jpg
PXL_20231120_150605180.PORTRAIT.ORIGINAL.jpg
PXL_20231120_150538074.PORTRAIT.jpg
PXL_20231120_150610276.PORTRAIT.ORIGINAL.jpg
PXL_20231120_150614468.PORTRAIT.jpg
PXL_20231120_150635352.PORTRAIT.ORIGINAL.jpg
👋
Fabian

 
Last edited:
Bump it up
Link to the short of it is in the first post
 
Back
Top