SOLD Custom hexagonal wa handle - Stabilized myrtle burl & ebony

[KasumiJLA]

New handle is up for grab! This handle was created for a length of 180 to 210mm. There is a nice tint of red color at the start of the neck, hence the red spacers. If you want it, just reach me via DM!

Price - 100$CAD + shipping
Material - Myrtle burl stabilized & ebony ring
Shape - Hexagonal
Height [front to back] - 24,5 to 27,2
Width [front to back] - 19,1 to 20,1
Tang opening - 4,3 x 11,9
Tang depth - 86,9
Length - 131,8
Weight - 40g
Finition - 400 grit and polymerized linseed oil
Shipping - United States ~13$usd | Europe ~18€





ADJUSTING THE OPENING
You will need to adjust the opening accordingly for the tang of your knife. To fine tunes the opening I recommend using a rasp or a file.

INSTALLATION
I highly recommend using epoxy to install my handle. The tang heating method is not suitable for this type of construction because the bonding is made from epoxy. The high heated temperature of the tang can soften the glue and cause breakage. Of course feel free to contact me if you want some help!

 

[Gshep91]

Ooh I like this one a lot. Each handle you post has me running to my rack to decide which one needs a new handle

 

[KasumiJLA]

Ooh I like this one a lot. Each handle you post has me running to my rack to decide which one needs a new handle

Haha I feel you! Since I make my own handle I probably switch mine every 2 weeks

 

[KasumiJLA]

Sold a long time ago outside KKF... sorry for not updating sooner!