New handle is up for grab! This handle was created for a length of 240mm but will be ideal between 220~250. There is a beautiful wave effect in the wood in both Buckeye and Curly Maple. If you want it, just reach me via DM!
Price - 105$CAD + shipping
Material - Buckeye burl stabilized, curly maple ring & stabilized pomelle sapele
Shape - Octogonal
Height [front to back] - 23,9 to 26,4
Width [front to back] - 18,6 to 21
Tang opening - 3,4 x 11,7
Tang depth - 105,2
Length - 137
Weight - 56g
Finition - 400 grit and polymerized linseed oil
Shipping - United States ~13$usd | Europe ~18€
ADJUSTING THE OPENING
You will need to adjust the opening accordingly for the tang of your knife. To fine tunes the opening I recommend using a rasp or a file.
INSTALLATION
I highly recommend using epoxy to install my handle. The tang heating method is not suitable for this type of construction because the bonding is made from epoxy. The high heated temperature of the tang can soften the glue and cause breakage. Of course feel free to contact me if you want some help!
Price - 105$CAD + shipping
Material - Buckeye burl stabilized, curly maple ring & stabilized pomelle sapele
Shape - Octogonal
Height [front to back] - 23,9 to 26,4
Width [front to back] - 18,6 to 21
Tang opening - 3,4 x 11,7
Tang depth - 105,2
Length - 137
Weight - 56g
Finition - 400 grit and polymerized linseed oil
Shipping - United States ~13$usd | Europe ~18€
ADJUSTING THE OPENING
You will need to adjust the opening accordingly for the tang of your knife. To fine tunes the opening I recommend using a rasp or a file.
INSTALLATION
I highly recommend using epoxy to install my handle. The tang heating method is not suitable for this type of construction because the bonding is made from epoxy. The high heated temperature of the tang can soften the glue and cause breakage. Of course feel free to contact me if you want some help!
