Twotimehojo
Well-Known Member
Hello!! The decision making is almost overwhelming. Need some help. I know the advice to buy them all. But not practical here
Deciding between these knives. Can someone comment on the grind and ease of sharpening. Why would I choose one over the other?
My questionaiire was filled out here:
https://www.kitchenknifeforums.com/...ce-needed-to-start-rabbit-hole-descent.47703/
Wakui 210 W2 Gyuto from CC.eu, Nashiji Finish
https://www.cleancut.eu/butik/knifebrands/wakui-sanjo/gyuto_wakui-3700-3719-3720-3748-detail
215mm Mizaki Gyuto from CC.eu, Migaki Finish
https://www.cleancut.eu/butik/knifebrands/mazaki-migaki/gyuto_kasumi-3131-detail
210 (214mm) Mizaki Gyuto from CKC, Nashiji Finish
https://carbonknifeco.com/collections/mazaki/products/mazaki-white-2-kuro-nashiji-gyuto-210mm
210 Yoshikane Gyuto, W2 Iron Cladding, K Finish. Great looking knife IMO. Height is only 47mm though.
https://carbonknifeco.com/collectio...-tsuchime-white-2-gyuto-210mm-chestnut-handle
210 Yoshikane Gyuto, W2 Iron Cladding, Nashiji Finish from CC.eu, There is the almost same knife in Kurochi finish too.
https://www.cleancut.eu/butik/knife...ane/kockkniv21_kashima_sanjo-octo-3258-detail
And to really throw into the mix.
210 Hinoura Gyuto, SS cladding. This may be my favorite but the most expensive.
https://www.cleancut.eu/butik/knifebrands/hinoura-3-series/hinoura/gyuto_hinoura-1-detail
Deciding between these knives. Can someone comment on the grind and ease of sharpening. Why would I choose one over the other?
My questionaiire was filled out here:
https://www.kitchenknifeforums.com/...ce-needed-to-start-rabbit-hole-descent.47703/
Wakui 210 W2 Gyuto from CC.eu, Nashiji Finish
https://www.cleancut.eu/butik/knifebrands/wakui-sanjo/gyuto_wakui-3700-3719-3720-3748-detail
215mm Mizaki Gyuto from CC.eu, Migaki Finish
https://www.cleancut.eu/butik/knifebrands/mazaki-migaki/gyuto_kasumi-3131-detail
210 (214mm) Mizaki Gyuto from CKC, Nashiji Finish
https://carbonknifeco.com/collections/mazaki/products/mazaki-white-2-kuro-nashiji-gyuto-210mm
210 Yoshikane Gyuto, W2 Iron Cladding, K Finish. Great looking knife IMO. Height is only 47mm though.
https://carbonknifeco.com/collectio...-tsuchime-white-2-gyuto-210mm-chestnut-handle
210 Yoshikane Gyuto, W2 Iron Cladding, Nashiji Finish from CC.eu, There is the almost same knife in Kurochi finish too.
https://www.cleancut.eu/butik/knife...ane/kockkniv21_kashima_sanjo-octo-3258-detail
And to really throw into the mix.
210 Hinoura Gyuto, SS cladding. This may be my favorite but the most expensive.
https://www.cleancut.eu/butik/knifebrands/hinoura-3-series/hinoura/gyuto_hinoura-1-detail