Quantcast

Help me drop 200$ on a chef knife...

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

Bluefish

Member
Joined
Jun 12, 2011
Messages
6
Reaction score
0
Hi guys, realize this is probably an much visited query but I am looking for an upgrade on a chef knife. I would not take it to work, just home use. Currently I have a 14 year old Lamson sharp, and a shun classsic which are both 10".
I also have a shun classic santoku that is 7" that sees a lot of use. I think I am proficient with my edge pro although the more I read the less I am sure about that...
I have a bunch of pocket knives in "snob" steels and can keep them quite sharp. I also have a few in high carbon and have no issue caring for them and don't mind the look of a patina.
Right now I am drawn to a miyabi 7000mc 240mm but have been looking for something in SG2 like the shun elites used.
I am not set on these and came here looking for advice. I have two young kids and bills to pay so this would be more or less a birthday "splurge". I would like to hear your thoughts and would be glad to answer any questions that would help you to guide me in the right direction. Thanks, Russ
 

Potato42

Senior Member
Joined
May 4, 2011
Messages
314
Reaction score
24
Trademarked gives a lot of bang for da bucks!
I'm guessing you mean "trade section"? Definitely good deals to be had in the buy sell trade sections. Just be wary of who you are buying from, and make sure the condition is clearly known and identified before pulling the trigger. I've bought a bunch of knives that way, but didn't always see the flaws right away. I think most sellers try to be honest, but may not know to list some things until asked. Ask how many pervious owners it's had, how many times it's been sharpened, ask if any major repairs have ever been done, find out why they are selling. "It's not right for me" is fair, but tends to point to something that could also be an issue for you as a new owner. Pictures of course are great, but rarely do even the best pictures give enough information for the discerning knifenut.
 

oivind_dahle

Banned
Joined
Mar 1, 2011
Messages
1,474
Reaction score
0
I have bought 2 knives on the trade section - Im so far very pleased :)
You could put up an "WTB: 240 Gyuto" here at KKF. I did it with a Carter and got an answer after just 2 days :)
 

JohnnyChance

Founding Member
Joined
Feb 28, 2011
Messages
3,418
Reaction score
15
The Miyabi Birchwood knives use SG2, but the 240mm version is $100 over budget.

The Fusion line that Miyabi also has is VG10, but the fit and finish is just as good (maybe even a bit better) than the Birchwood, and Miyabi has done a great job with the heat treat on the VG10, and it performs quite well. A 10" is about $140. I have both and like both, if you have an SLT near you, you can handle these in person before deciding what you like.
 

WildBoar

Home cook, knife accumulator
Founding Member
Supporting Member
Joined
Feb 28, 2011
Messages
4,756
Reaction score
952
Location
NoVa (US)
Hiromoto AS 240 gyuto is fun to play with. Core is carbon, but cladding is stainless steel so it's pretty easy to care for. It's a bit on the thicker side, esp compared to the Shun, but a 'tune' by Dave Martell can reap big benefits. Buy the knife now and have Dave tune it for you, and you should be under $200. Then next year spring for a new custom handle (as the stock ones are pretty horrible), and make it 'your own'.
 

stevenStefano

Senior Member
Joined
May 7, 2011
Messages
1,421
Reaction score
1
I'd get the Hattori FH oivind linked. It is a handsome knife and its not so laser-ish that you will need to make any adjustments when using it from the knives you already have
 

EdipisReks

Senior Member
Joined
Mar 1, 2011
Messages
4,001
Reaction score
2
the FH is a great knife. it's the only stainless knife i've kept. it's thin, but not so thin you have to worry about it. i have a 270 Kono white #2, and i'm sure that the Kono stainless is good too. get the FH if you want a western handle, and the kono if you'd like to try a wa. i'd get either over the miyabi, based on blade shape. both the Hattori and the Kono also have some belly, but there is something about the Miyabi that rubs me wrong, just looking at it.
 

mmingio2

Well-Known Member
Joined
May 17, 2011
Messages
67
Reaction score
0
I've had my Hattori FH 240 for about 6 weeks now and I love it. Took a great edge on the Edge Pro (I use the Chosera set to 10K then strop with cardboard and newspaper) and it sees nearly daily use in my home only. I strop after every use and have not had to hit the stones again yet. I have a variety of shuns classics also...they are my wife's now. She is happy with them and doesn't touch my FH.
 

kalaeb

Banned
Joined
Feb 28, 2011
Messages
2,323
Reaction score
1
Its not sg2, but I would like to add the carbonext for consideration, that knife still puts out some of the best bang for the buck and fit and finish are some of the best in that price range.
 
Top