Sorry, guys, too much pressure on my side, don't need to sell, so this is gonna be withdrawn.
Hi, I’m selling a real unicorn made by Xerxes.
It is an absolute unique piece, unparalleled in design, effort, steel, and execution.
It is a 1/2-integral made from a remelted 9mm bar of 135WCrV4/1.2513 TWR, differentially hardened.
analysis:
C: 1.30-1.40, SI: 0.20-0.40, P: 0.035, S: 0.035
Cr: 0.30-0.40, V: 0.10-0.20
W: 0.80-1.10
Here are the dimensions:
Overall length: 380mm
Blade length: 222mm
Blade height: 50mm
Handle height: Front 22mm, Rear 28mm
Handle thickness: Front 20mm, Rear 22mm
Total weight: 219 grams
Balance point at the forge mark
Spacer: one made of textured copper & one made of textured puddled iron
Handle material: Bog oak (Additionally, there is a second handle made of pressed and vacuum-cast colorful coffee bag)
Saya made of bog oak as well
"Angel" and pivot pin made of 42CrMo4
End screw: made of puddled iron, with a Torx 25 screw head forged in while glowing, heat-colored!
Bolster and logo blued
Jannis has gone to great lengths to implement this project. In some cases, the turning of certain parts had to be done in other workshops because Jannis did not have the necessary machines available.
The knife is a technical highlight and more than the sum of its parts. A knife for kitchen knife enthusiasts who appreciate craftsmanship.
Here are the pics:
(more pics to come)
Im selling for 2.500€ (now: 2.400€). Knife is located in Austria. Feel free to ask if you have any questions.
Best,
Mack.
Hi, I’m selling a real unicorn made by Xerxes.
It is an absolute unique piece, unparalleled in design, effort, steel, and execution.
It is a 1/2-integral made from a remelted 9mm bar of 135WCrV4/1.2513 TWR, differentially hardened.
analysis:
C: 1.30-1.40, SI: 0.20-0.40, P: 0.035, S: 0.035
Cr: 0.30-0.40, V: 0.10-0.20
W: 0.80-1.10
Here are the dimensions:
Overall length: 380mm
Blade length: 222mm
Blade height: 50mm
Handle height: Front 22mm, Rear 28mm
Handle thickness: Front 20mm, Rear 22mm
Total weight: 219 grams
Balance point at the forge mark
Spacer: one made of textured copper & one made of textured puddled iron
Handle material: Bog oak (Additionally, there is a second handle made of pressed and vacuum-cast colorful coffee bag)
Saya made of bog oak as well
"Angel" and pivot pin made of 42CrMo4
End screw: made of puddled iron, with a Torx 25 screw head forged in while glowing, heat-colored!
Bolster and logo blued
Jannis has gone to great lengths to implement this project. In some cases, the turning of certain parts had to be done in other workshops because Jannis did not have the necessary machines available.
The knife is a technical highlight and more than the sum of its parts. A knife for kitchen knife enthusiasts who appreciate craftsmanship.
Here are the pics:
(more pics to come)
Im selling for 2.500€ (now: 2.400€). Knife is located in Austria. Feel free to ask if you have any questions.
Best,
Mack.
Last edited: